Tektronix AFG1062 60 MHz 2-Channel Arbitrary Function Generator

The Tektronix AFG1062 rental Vietnam service from Lost in HCM gives engineering teams in Vietnam short-term access to this function generator, with sale and service options on request.

Tektronix AFG1062 rental Vietnam overview

Every test plan needs a known, repeatable input before it can judge an output. The Tektronix AFG1062 rental Vietnam provides that input with set frequency, amplitude, and shape. As a result, teams can test filters, amplifiers, sensors, and receivers in a controlled way.

Lost in HCM supplies these generators for rental or purchase, always on a quote basis. Each rental unit ships with a valid calibration certificate. Also, for units you already own, we can arrange service through Tektronix or an authorized partner.

Tektronix AFG1062 rental Vietnam: about the AFG1062

Tektronix AFG1062 rental Vietnam: tektronix AFG1062 overview

The AFG1062 is a two-channel stimulus source with sine-wave frequencies up to 60 MHz. Its 300 MS/s arbitrary waveform capability and 14-bit resolution support repeatable signal injection when evaluating filters, amplifiers and low-voltage electronic circuits.

Tektronix AFG1062 rental Vietnam: specifications

Manufacturer	Tektronix
Model	AFG1062
Series	AFG1000
Channels	2
Sine frequency range	1 μHz to 60 MHz
Arbitrary waveform sample rate	300 MS/s
Vertical resolution	14 bits
Arbitrary waveform memory	2 to 8,000 points, as listed in the current linked datasheet
Typical output impedance	50 Ω
Amplitude into 50 Ω	1 mVpp to 10 Vpp at ≤25 MHz; 1 mVpp to 5 Vpp above 25 MHz
Signal ground	Connected to chassis ground; not a floating output

Specifications above describe the manufacturer model. The exact delivered configuration, probes, calibration status and included accessories must be confirmed in the quotation.

Tektronix AFG1062 rental Vietnam: measurement applications

Set frequency, amplitude, offset and the expected load before enabling an output. The displayed voltage depends on the load setting: a high-impedance input and a 50 Ω termination do not receive the same voltage for the same source conditions. Use the datasheet limits for the selected waveform and frequency. Teams in Vietnam often choose Tektronix AFG1062 rental for this reason.

Tektronix AFG1062 rental Vietnam: connection schematic

AFG AFG1062 CH1 → suitable coaxial cable → circuit input
Circuit output → suitable oscilloscope probe → oscilloscope CH1
Signal reference ↔ common circuit reference (only where safe)

This is an illustrative bench connection schematic, not an internal service circuit diagram. The generator output ground is connected to chassis ground. Confirm grounding, termination, amplitude and offset limits before connecting the circuit; do not use this arrangement on mains-referenced or floating high-voltage nodes.

Product images and connections

Request a quotation in Vietnam

Contact Lost in HCM with model AFG1062, your application, required accessories and preferred delivery date. Pricing, availability and any rental or service arrangement are confirmed individually before an order is accepted.

Manufacturer reference

Tektronix AFG1000 official specifications and ordering information. Reviewed 19 October 2026.

How the function generator works

Sample rate and resolution set the quality of an arbitrary waveform. For example, a higher sample rate places more points on each cycle, so edges stay sharp. Meanwhile, 14-bit or 16-bit resolution gives finer amplitude steps and lower distortion. This applies to every Tektronix AFG1062 rental we arrange in Vietnam.

Most outputs have a 50 Ω source impedance, which matters for the level you see. For instance, a high-impedance load can show about twice the amplitude set for 50 Ω. Therefore, match the load setting to your circuit, and check multichannel timing when channels must stay in step.

What to look for in a function generator

Before you rent or buy, write down the fastest signal and the most complex shape you need. Then note how many outputs must run together. The features below explain what to compare, from frequency range to memory depth and output level.

• Frequency range for your signals. Sine output here runs from 25 MHz on entry models up to 250 MHz on the AFG31000. So choose a range well above your highest test frequency to keep square and pulse edges clean. So, plan it early when you book a Tektronix AFG1062 rental in Vietnam.
• Sample rate and resolution. Sample rate sets how finely the generator builds each waveform. For example, AFG31000 models run from 250 MS/s to 2 GS/s at 14 bits. Meanwhile, AWG5200 units reach 5 GS/s with up to 16-bit resolution.
• Waveform memory depth. Memory sets how long or detailed an arbitrary waveform can be. AFG1000 models store up to 8,000 points, AFG31000 models 16 Mpoints standard, and AWG5200 units 2 Gsamples. As a result, long sequences need the deeper models.
• Channel count and sync. Single-channel models suit simple stimulus work, while two-channel models add a second linked output. However, AWG5200 units offer 2, 4, or 8 outputs, so complex multichannel setups stay in step.
• Modulation, sweep, and burst. Function generator models add built-in modes such as AM, FM, sweep, and burst. So you can check a filter response or sweep a receiver without building a custom waveform first. Our Tektronix AFG1062 rental units in Vietnam ship ready for this kind of work.
• Output level and impedance. Check the amplitude range and the 50 Ω output against your load. For instance, a high-impedance input reads about double the set level, so set the load mode first.

Typical applications

Function generators sit next to oscilloscopes in labs, lines, and service benches across Vietnam. The tasks below cover most rental and purchase requests. In short, they range from simple filter checks to multichannel signal emulation for receiver design.

• Filter and amplifier response. Engineers sweep a sine wave across a band to see gain and phase change. Then they find cutoff points, peaking, and distortion before a design goes to production.
• Sensor and ADC simulation. A generator can stand in for a real sensor, such as an encoder or a strain gauge output. As a result, teams can test firmware and ADC front ends before the real hardware arrives. Rental of the Tektronix AFG1062 is available across Vietnam.
• Clock and timing tests. Pulse and square outputs act as clocks, triggers, and gate signals for digital circuits. Also, adjustable edges and duty cycle help teams check timing margins and logic thresholds.
• Power electronics and control loops. Engineers inject small signals into feedback loops to study stability in power supplies and motor drives. For example, a swept sine helps them map loop gain and phase.
• Receiver and radar signal emulation. Multichannel AWGs replay complex baseband and IF signals for receiver and radar work. So teams can test demodulation, timing, and channel alignment with repeatable, known inputs.
• Training and production checks. Training labs and QC benches need simple, reliable sources in quantity. Therefore, entry models like the AFG1022 and AFG1062 suit that role and keep budgets modest. Teams in Vietnam often choose Tektronix AFG1062 rental for this reason.

Industries that use the Tektronix AFG1062 rental Vietnam

Any team that must prove a circuit works needs a reliable signal source. That is why generators appear across the sectors below. In Vietnam, many of these users are FDI plants and R&D centers serving global brands.

• Electronics manufacturing services. EMS plants in Bac Ninh, Bac Giang, and Binh Duong test boards for many global brands. Therefore, generators feed stimulus into functional test stations, and extra rental units cover production ramps.
• Semiconductor and IC test. Chip assembly and test sites in Vietnam need clean clocks and stimulus for device checks. In addition, high-resolution AWGs help teams test mixed-signal parts such as data converters.
• Automotive and EV electronics. Vehicle modules must handle sensor signals, noise, and supply dips. For example, teams simulate wheel speed sensors and other inputs during validation work. This matters more as Vietnam's EV and parts sector grows. This applies to every Tektronix AFG1062 rental we arrange in Vietnam.
• Telecom and wireless. Makers of RF modules and network gear need repeatable baseband and IF signals. So multichannel AWGs help them test receivers, while bench AFGs supply clocks and modulation checks.
• Industrial automation. Factories in Vietnam's industrial parks run drives, PLCs, and sensors that need checks after faults. As a result, maintenance teams use generators to inject test signals and confirm each input responds.
• Education and research. Universities and research institutes in Vietnam teach circuits and signals with hands-on labs. Therefore, they need many dependable two-channel generators at once, and rental can equip a lab for one course.

Tektronix AFG1062 rental Vietnam compared with other brands

No single generator suits every bench, so it pays to look at a few options. For example, set the Tektronix AFG1062 rental Vietnam beside the lines below and compare them. However, your frequency, channel, and memory needs should decide the final choice.

Start with the frequency, resolution, and channel count your tests demand. Then compare memory depth, output level, and software side by side. Finally, confirm current specs with each maker, because model lists and options change often. Specifications change, so confirm current data with each maker before you decide.

Rent or buy?

Rent a generator for a design project, a qualification test, a production ramp, or a short course. Rental also opens access to multichannel AWGs for one-off emulation work. When the job ends, the unit goes back, and your budget stays free for other tools.

Selection tips

• Choose a sine range well above your highest test frequency. Square and pulse outputs often run lower than sine, so check those limits too.
• Pick an AWG when you must replay long or complex waveforms at high speed. For simple sine, pulse, and sweep tests, however, a bench AFG is usually enough. So, plan it early when you book a Tektronix AFG1062 rental in Vietnam.
• Count the outputs that must run together at the same time. For example, I/Q signals need two linked channels, while array or radar work may need four or eight.
• Check waveform memory against the longest record you plan to load. So a captured field signal with millions of points needs a deep-memory model, not an entry unit.
• Confirm the amplitude range into your actual load. Also, set the load mode to 50 Ω or high impedance so displayed levels match.
• Look at the software for building arbitrary waveforms. In addition, check USB or LAN remote control if the unit joins an automated test system.

Handling and care

• Keep external voltages off the generator outputs unless the manual allows them. Otherwise, a back-driven output stage can fail, so use an injection transformer or isolation when needed. Our Tektronix AFG1062 rental units in Vietnam ship ready for this kind of work.
• Wear an ESD strap when you connect cables to sensitive circuits or high-speed AWG outputs. Also, cap unused SMA and BNC connectors to keep dust and damage away.
• Allow the warm-up time listed in the manual before you make precise level or timing measurements. Then run any self-calibration or alignment routine the manual describes, especially on AWGs.
• Follow the calibration interval Tektronix recommends, which is often one year. Rental units ship with a valid calibration certificate. Also, we can arrange service through the maker or an authorized partner.
• Ship generators in padded cases with cables and adapters packed apart from the front panel. In addition, keep units dry during Vietnam's humid wet season to protect connectors.

Frequently asked questions

Request a quote

Tell us the model, options, dates and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669. Rental of the Tektronix AFG1062 is available across Vietnam.