Fluke Rental in Vietnam — Multimeters, Thermal Cameras, Calibrators, Power Loggers
Lost in HCM rents ten Fluke instruments — 87V, 289 and 1587 FC multimeters, TiS75+ and Ti480 PRO thermal cameras, 754 and 726 process calibrators, the 1523 reference thermometer and the 1736 and 1738 three-phase power loggers — from about USD 25 per week, each with an ISO/IEC 17025 calibration certificate. It is the only Fluke rental fleet in Vietnam published with prices, and it is delivered to Ho Chi Minh City, Binh Duong and Dong Nai in one to two working days, with bulk kits for audits, shutdowns and training.
Fluke models available to rent
| Model | Type | Key specs | Weekly (USD, indicative) | Monthly (USD, indicative) |
|---|---|---|---|---|
| Fluke 87V | Digital multimeters | True-RMS AC voltage and current; DC voltage accuracy 0.05%; Low-pass filter for VFD motor-drive measurements | 25-40 | 60-100 |
| Fluke 289 | Digital multimeters | 50,000-count resolution; DC voltage accuracy 0.025%; On-board logging of up to 10,000 readings | 35-55 | 90-150 |
| Fluke 1587 FC | Digital multimeters | Insulation test voltages 50, 100, 250, 500 and 1000 V; Insulation resistance to 2 GΩ; Full true-RMS multimeter functions | 40-60 | 100-170 |
| Fluke Ti480 PRO | Thermal cameras | 640 x 480 infrared resolution; Temperature range -20 °C to +1000 °C; MultiSharp Focus and LaserSharp Auto Focus | 250-380 | 650-1000 |
| Fluke TiS75+ | Thermal cameras | 384 x 288 infrared resolution; Temperature range -20 °C to +550 °C; IR-Fusion and picture-in-picture | 90-140 | 250-400 |
| Fluke 754 | Calibrators | Sources and measures mA, V, RTD, thermocouple, frequency, resistance and pressure (with 750P modules); Built-in HART communicator for transmitter configuration; Automated as-found/as-left procedures with DPCTrack2 software | 180-270 | 480-750 |
| Fluke 726 | Calibrators | Accuracy 0.01% of reading; Sources and measures mA, V, thermocouple, RTD, frequency and resistance; Pressure measurement with 29 Fluke 700P modules | 100-150 | 260-420 |
| Fluke 1523 | Calibrators | Reads PRT, thermistor and thermocouple probes; Accuracy to ±0.011 °C with PRT (probe dependent); Temperature range -200 °C to +2315 °C depending on probe | 60-90 | 150-250 |
| Fluke 1736 | Power quality analyzers | Three-phase voltage, current, power and energy logging; Harmonics analysis to the 50th; 1000 V CAT III / 600 V CAT IV | 120-180 | 300-500 |
| Fluke 1738 | Power quality analyzers | All 1736 functions plus advanced power quality; Dips, swells, inrush and interruptions with waveform capture; Voltage and current unbalance | 150-220 | 400-650 |
Why rent Fluke from Lost in HCM
- Certificates on every meter, camera and calibrator, so audit and maintenance reports carry traceable data.
- Kits, not bare instruments: leads, clamps, flexible probes, pressure modules, batteries, cases and software are packed with the unit.
- Volume rates for 5+ meters or cameras; weekly terms for one-off surveys.
- Loaner while your own Fluke instrument is calibrated in our laboratory.
Rent by instrument type
Oscilloscopes · Spectrum & signal analyzers · Signal generators · Network analyzers · Digital multimeters · Power supplies · Thermal cameras · Calibrators · Power quality analyzers · Electronic loads
Popular Fluke rental combinations
Ti480 PRO + 87V (electrical thermography with root-cause meter) · 1738 + 1587 FC (power-quality and insulation survey) · 754 + 750P modules + 1523 (annual calibration campaign) · 10× 87V (audit or technician course) · TiS75+ (first-year maintenance rounds at a new plant).
FAQ
Do you rent the Fluke Ti401 PRO?
The Ti401 PRO is discontinued; we rent the Ti480 PRO (640 x 480, 1000 °C) and the TiS75+ instead.
Are Fluke thermal cameras calibrated?
Yes, with an ISO/IEC 17025 temperature certificate valid for the rental period.
Do the 1736/1738 come with current probes?
Yes — four i17xx-flex1500 flexible probes, voltage leads and software are included.
Can I rent pressure modules with the 754 or 726?
Yes; specify ranges and we ship matching 750P/700P modules with certificates.
Do you rent Fluke clamp meters, earth testers or process meters not listed?
On request from partner stock, typically within a week.
Is there a minimum quantity?
No; single meters are rented weekly, and batches of 5+ receive a volume discount.
Request a rental quote
Tell us the model, dates and delivery address; we reply within one working day with price, availability and calibration status.
Request a rental quote · Call 0902 327 669 · Email Zalo / WhatsApp 0902 327 669
