Tektronix MSO68B 8-Channel Mixed Signal Oscilloscope

The Tektronix MSO68B rental Vietnam service from Lost in HCM gives engineering teams in Vietnam short-term access to this oscilloscope, with sale and service options on request.

Tektronix MSO68B rental Vietnam overview

Every electronic design needs proof that its signals look right. The Tektronix MSO68B rental Vietnam gives that proof with captured waveforms, measurements, and decoded data. Then the team can find root causes faster, while saved screens support reports for customers.

Lost in HCM offers these scopes and probes for rent or sale on a quote basis. Rental units ship with a valid calibration certificate. In addition, we can arrange service through the manufacturer or an authorized partner for units you own.

Tektronix MSO68B rental Vietnam: about the MSO68B

Tektronix MSO68B rental Vietnam: tektronix MSO68B overview

The MSO68B provides 8 FlexChannel inputs in the 6 Series B MSO range. It supports observing several circuit nodes together when investigating timing, signal relationships and intermittent behavior. Specify the bandwidth and record length required for your application when requesting a quotation.

Tektronix MSO68B rental Vietnam: specifications

Manufacturer	Tektronix
Model	MSO68B
Series	6 Series B MSO
FlexChannel inputs	8
Bandwidth configuration	1 GHz to 10 GHz, depending on option and active-channel configuration
Maximum sample rate	Up to 50 GS/s on 2 channels; 25 GS/s on 4; 12.5 GS/s on more than 4 (configuration dependent)
Record length	62.5 Mpoints standard; optional up to 1 Gpoint on 4 channels or 500 Mpoints on more than 4
Digital capability	Up to 64 digital channels using optional compatible logic probes; each FlexChannel is analog or 8 digital channels
Optional analysis	Protocol, power and other analysis packages depend on installed licenses

The table describes model capabilities. Confirm the delivered bandwidth, options, calibration documentation and accessories before ordering.

Tektronix MSO68B rental Vietnam: measurement applications

Eight inputs provide more measurement points for complex embedded-system and multichannel investigations. Each FlexChannel can accept an analog probe or, with an appropriate optional logic probe, eight digital inputs. The maximum analog and digital counts are alternative allocations of the same inputs, not simultaneous independent maxima. Teams in Vietnam often choose Tektronix MSO68B rental for this reason.

Choose probes, bandwidth, memory and analysis licenses as a complete measurement configuration. Highest sample-rate and bandwidth figures depend on active-channel configuration; they should not be assumed on every channel simultaneously.

Tektronix MSO68B rental Vietnam: connection schematic

Low-voltage circuit node → rated probe → MSO68B CH1
Second circuit node → rated probe → CH2
Optional logic probe → chosen FlexChannel → digital test points

Illustrative measurement connection, not an internal service circuit. Check input ratings and grounding in the instrument and probe manuals. Do not connect a conventional probe reference lead to a live mains or arbitrary floating node; use a suitably rated differential or isolated measurement system when required.

Product images and connections

Request a quotation in Vietnam

Request a quotation for Tektronix MSO68B. Include the signals to test, required options, accessories and delivery needs. Price, condition, local availability and any rental arrangement are confirmed individually.

Manufacturer references

Official Tektronix 6 Series B MSO product page · Manufacturer datasheet. Reviewed 19 October 2026. This applies to every Tektronix MSO68B rental we arrange in Vietnam.

How the oscilloscope works

A digital oscilloscope samples the input signal many times each second. First, the probe and front end scale the signal. Then a converter turns each sample into a number, so the scope can draw the waveform.

A trigger tells the scope when to capture, such as on a rising edge. As a result, repeating signals stay stable on the display. Meanwhile, deep memory lets the scope store long records at full sample rate for later review.

What to look for in an oscilloscope

Before you rent or buy, list your fastest signals and the buses you need to view. Then note any power or RF work in your plan. The features below explain what to compare, from bandwidth and resolution to memory, channels, and probes.

• Bandwidth for your signals. Entry models start at 50 MHz, while mid-range models run past 1 GHz. So pick a bandwidth well above your fastest signal. That margin keeps edges and timing accurate on screen. So, plan it early when you book a Tektronix MSO68B rental in Vietnam.
• High vertical resolution. Resolution sets how much detail you see on small signals. For example, the Rigol DHO4204 and Tektronix MSO44B offer 12 bits. Meanwhile, the R&S RTB2004 and RTM3004 offer 10 bits for clearer power rail views.
• Deep acquisition memory. Deep memory keeps the sample rate high on long captures. The DHO4204 offers 500 Mpts, while the RTM3004 offers 80 Mpts. Therefore, you can record long sequences without losing detail.
• Channels and logic inputs. Most models here offer two or four analog channels. Mixed signal models add logic inputs, such as 16 channels on the MSOX4154A. As a result, you can debug buses and analog signals together.
• Built-in tools and decode. Many scopes add serial decode, a function generator, or a spectrum view. For instance, the MDO34 includes a spectrum analyzer, while the DSOX1204G adds a generator. These tools also save bench space and cost. Our Tektronix MSO68B rental units in Vietnam ship ready for this kind of work.
• Probes that match the scope. Probes also shape what the scope really sees. So R&S active probes, such as the RT-ZD and RT-ZS models, extend reach for fast signals. Modular RT-ZM probes also accept a range of tips.

Typical applications

Oscilloscopes appear in almost every electronics lab, line, and service bench. The tasks below cover most rental and purchase requests in Vietnam. They range from basic training to high-speed digital and power electronics debug work.

• Power supply debugging. Switch-mode supplies create ripple, noise, and fast switching edges. So engineers use high-resolution scopes to see small details on each rail. This helps them meet noise limits before release.
• Embedded firmware bring-up. New boards need checks on clocks, resets, and serial buses. Therefore, mixed signal scopes with decode show timing and data together. Then firmware teams can find faults much faster. Rental of the Tektronix MSO68B is available across Vietnam.
• Intermittent glitch hunting. Rare glitches can crash a system once a day. A fast update rate, like 1M wfms/s on the DSOX3024G, raises the chance of catching them. Deep memory then stores the whole event for review.
• Motor drive and EV diagnostics. Drives and vehicle systems switch high currents at speed. For example, engineers check gate signals and phase currents with suitable probes. Portable scopes like the MSO24 also work in the field.
• EMI and wireless troubleshooting. Wireless modules and noisy circuits need time and frequency views. So the MDO34 shows RF spectrum next to analog and digital signals. As a result, engineers link noise to its source.
• Training and production checks. Training rooms and QC benches need simple, reliable scopes in quantity. Entry models like the DS1054Z, TBS1102C, and EDUX1052G suit that role. They also keep the rental budget modest for large groups. Teams in Vietnam often choose Tektronix MSO68B rental for this reason.

Industries that use the Tektronix MSO68B rental Vietnam

Oscilloscopes matter in every business that designs, builds, or services electronics. The industries below rent and buy them most often in Vietnam. Many are FDI plants and R&D centers that work for large global brands.

• Electronics manufacturing services. EMS plants in Bac Ninh, Bac Giang, and Binh Duong debug boards for many brands. So they keep scopes on test and repair benches. They also rent extra units during production ramps.
• Power electronics. Makers of supplies, chargers, and inverters need clean views of fast switching. Therefore, they use high-resolution scopes with suitable probes. This helps them pass efficiency and noise tests.
• Automotive and EV. Vehicle electronics and EV systems need validation in labs and vehicles. For example, teams check CAN buses, gate drives, and sensors. Portable and 12-bit scopes both play a role. This applies to every Tektronix MSO68B rental we arrange in Vietnam.
• Semiconductor and high-speed design. Chip and high-speed board teams measure fast edges and signal integrity. So they pair higher-bandwidth scopes with active probes. Modular probe systems also cover many tip styles.
• Industrial automation. Factories run PLCs, drives, and sensors that sometimes fail without warning. As a result, maintenance engineers use scopes to trace faults. Portable models help them work at the machine.
• Education and training. Universities and training centers in Vietnam teach circuits with hands-on labs. Therefore, they need many reliable entry scopes at once. Rental helps them equip a lab for a single course.

Tektronix MSO68B rental Vietnam compared with other brands

Many makers build oscilloscopes for every budget and bandwidth. Each takes a different approach to resolution, memory, and software. The rows below show where the Tektronix MSO68B rental Vietnam sits among other common choices on the market.

Pick the scope that matches your bandwidth and resolution needs first. Then compare memory, channels, probes, and software side by side. Meanwhile, keep in mind that specs change over time, so confirm current specs with each maker. Specifications change, so confirm current data with each maker before you decide.

Rent or buy?

Rent a scope for a design project, a production ramp, a failure analysis, or a training course. Rental also gives access to high-bandwidth models and active probes for short jobs. Then you return them, so your capital stays free for other needs.

Selection tips

• Choose a bandwidth several times higher than your fastest signal frequency. So edges and timing stay accurate on screen and in measurements.
• Pick a 10-bit or 12-bit scope for power rails and small signals. Otherwise, an 8-bit scope may hide ripple and noise in its own noise floor. So, plan it early when you book a Tektronix MSO68B rental in Vietnam.
• Count the analog and digital channels you need at once. For example, bus debug often needs logic channels next to two analog inputs.
• Check memory depth when you need long captures. Deep memory keeps the sample rate high, so you can zoom in on detail after the capture ends.
• Plan probes with the scope, because the probe limits what you see. Also choose high-voltage or differential probes for power work.
• List the buses you must decode, such as I2C, SPI, CAN, or UART. Then confirm the scope has the matching decode options installed.

Handling and care

• Wear an ESD strap and handle active probe tips with care. Also store tips and modules in their cases, because they break easily.
• Respect the input limits of every channel and probe. Then use proper high-voltage or differential probes on mains and power circuits. Our Tektronix MSO68B rental units in Vietnam ship ready for this kind of work.
• Let the scope warm up for the time the maker states before precise measurements. Next, run probe compensation or calibration routines as the manual says.
• Follow the calibration interval each maker states, which is often one year. Rental units ship with a valid calibration certificate. Also, we can arrange service through the maker or an authorized partner.
• Ship scopes and probes in padded cases with probes coiled loosely. In addition, keep them dry during Vietnam's humid wet season.

Frequently asked questions

Request a quote

Tell us the model, options, dates and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669. Rental of the Tektronix MSO68B is available across Vietnam.