Model
N6773A
Keysight N6773A DC Power Module, 20V, 15A, 300W | Vietnam
Stock:Còn hàng: / US origin
-
Mã SKU: CAT-KEYSIGHT-N6773ASKU: CAT-KEYSIGHT-N6773A
-
Category: DC Power Supplies.Category: DC Power Supplies.
Liên hệ
Keysight N6773A DC Power Module, 20V, 15A, 300W. Request rental, repair evaluation or a purchase quotation in Vietnam.
Keysight N6773A rental, repair and sale in Vietnam supports engineering, manufacturing, research, education and service teams that need temporary test capacity, technical evaluation or a purchase quotation. This quote-led record is subject to lifecycle, configuration, condition and availability.
Send the exact model, application, measurement range, interfaces, required accessories, project dates, delivery city and whether you need rental, repair, calibration support or purchase. Final technical acceptance must use current Keysight documentation and the supplier quotation.
Keysight N6773A product image
Keysight N6773A specifications
Manufacturer configuration
DC Power Module, 20V, 15A, 300W
Product category
DC Power Supplies
Configuration review
Confirm exact interfaces, installed options, compatible accessories and calibration requirements
Specification control: These selection-level facts summarize the named model. The current Keysight data sheet, installed option list, firmware, serial-number configuration, supplier quotation and calibration documentation govern final technical acceptance.
Conceptual schematic and test setup
Conceptual connection sequence for Keysight N6773A
Configured power or source-measure platform → protected DUT fixture → voltage and current measurements
Translate the measurement into bias, range, compliance, resolution and timing requirements. For a modular mainframe, select compatible modules before defining channel capabilities. Check guarding or sensing, wiring and protection against the manufacturer guide. Record the load envelope and test conditions, then verify source and measurement behavior with a reference fixture.
The manufacturer identifies the N6773A configuration as DC Power Module, 20V, 15A, 300W. Use the official model page to select the exact options. Record the configuration, timing and environmental limits for the project, along with a reference test result. Compare alternatives using the same setup and acceptance criteria.
For a Vietnam quotation, include the delivery site, project dates, host configuration, connector or fixture details, software, and calibration evidence needed for acceptance. For repair intake, include the observed symptom, serial number and a known-good test result when available.
Configuration review
Exact model and options
Confirm the full model, serial number, installed options, firmware, software licenses, connectors, accessories and lifecycle status. Similar front panels can conceal important configuration differences.
Measurement requirements
Define ranges, accuracy, noise, speed, channels or ports, dynamic behavior and uncertainty required by the real test plan.
System integration
Check remote interfaces, drivers, commands, fixtures, cables, probes, automation software, rack hardware, power, ventilation, grounding and safety controls.
Commercial configuration
A complete quotation identifies condition, included hardware and licenses, calibration evidence, warranty, service scope, delivery terms, lead time and exclusions.
Applications and industries
Electronics design
Use the instrument for component, board, subsystem and product development after translating design questions into measurable limits, stimulus conditions, fixtures and pass-fail criteria.
Manufacturing and repair
Support incoming inspection, production test, troubleshooting, failure analysis, repair verification and automated stations with documented setups and controlled accessories.
Automotive and energy
Apply suitable configurations to power electronics, batteries, charging, wireless modules, control systems and sensors while reviewing grounding, isolation, power and regulatory constraints.
Telecommunications
Evaluate RF, microwave, network, connectivity and protocol performance when options, frequency coverage, ports, software and fixtures match the target technology.
Semiconductor research
Characterize devices, components and materials with appropriate biasing, shielding, calibration, de-embedding, noise control, automation and data traceability.
Education and laboratories
Provide supervised measurement capability for teaching, method development, research and shared facilities with clear booking, calibration, safety and configuration procedures.
Rental support
Rental can cover a validation campaign, urgent replacement, production ramp, demonstration, field project, training event or temporary capacity increase. Provide dates, duty cycle, site, measurement requirements, fixtures, accessories, interfaces, software, calibration evidence, logistics and return schedule.
Before dispatch, agree on the exact configuration, included cables and accessories, condition, functional checks, packing, insurance, site readiness and return terms. Availability and suitability are confirmed only after technical review.
Repair and calibration evaluation
For repair, send the model and serial number, symptoms, error messages, self-test results, photographs, connector condition, firmware, installed options, recent events, known-good accessory checks and service history. Stop operating equipment that shows smoke, liquid ingress, damaged insulation, abnormal heating or unsafe behavior.
Technical intake separates an instrument fault from cables, fixtures, probes, software, configuration, grounding, facility power, network settings or the device under test. Functional repair and traceable calibration are separate deliverables.
Purchase planning
For sale, state whether new, used, refurbished or an equivalent current model is acceptable. Include performance requirements, interfaces, options, accessories, documentation, calibration, warranty, destination and required delivery date.
Customers replacing an installed unit should share its label, option list, automation commands, fixture details, saved procedures and mechanical constraints. Final acceptance should reference the supplier quotation and current manufacturer documentation.
Cross-brand benchmark
Compare this Keysight model with suitable Rohde & Schwarz, Tektronix, Keithley, Anritsu, NI, Chroma, EA Elektro-Automatik, Rigol or other equipment in the same class. Review range, accuracy, noise, speed, channels or ports, dynamic range, software, licenses, automation, accessories, calibration, warranty, lifecycle and local support.
The best benchmark follows the real test method and integration constraints. A similar headline specification does not guarantee compatible connectors, commands, uncertainty, options, fixtures, throughput or serviceability.
Selection checklist
- Confirm the exact model, serial number, lifecycle, firmware and installed options.
- Define measurement or stimulus range, accuracy, noise, speed, channels, ports and test limits.
- Specify cables, probes, fixtures, adapters, software, licenses and remote interfaces.
- Check facility power, grounding, ventilation, rack space, network and safety requirements.
- State calibration, documentation, warranty, training, installation and delivery needs.
- For repair, include symptoms, self-tests, photographs, history and known-good accessory checks.
- Approve the final quoted configuration before rental, service intake or purchase.
Documentation and acceptance
Define an acceptance checklist covering identity, condition, startup, self-test, installed options, accessories, communications, representative measurements, calibration documents and packing. For automated systems, preserve driver versions, command examples, configuration files and screenshots. For shared laboratories, record users, booking rules, warm-up time, connector care, backup settings and escalation contacts.
Frequently asked questions
Can I rent this model in Vietnam?
Rental may be quoted after configuration, dates, location, accessories, calibration requirement and inventory are checked.
Can it be evaluated for repair?
Technical evaluation begins with serial number, symptoms, self-tests, photographs, configuration, firmware and service history.
Are software and accessories included?
Only items listed in the quotation are included. Licenses, cables, probes, fixtures, adapters, modules and calibration documents must be itemized.
Can I purchase new or used equipment?
New, used, refurbished or equivalent equipment may be quoted subject to lifecycle, condition, configuration, warranty and availability.
How should alternatives be compared?
Compare the complete workflow, including uncertainty, fixtures, software, automation, throughput, calibration, service and total project cost.
Is this page enough for technical approval?
No. Confirm the serial-number configuration, supplier quotation and current manufacturer documentation before ordering.
Request a Keysight N6773A quote
Contact Lost in HCM for Keysight N6773A rental, repair and sale in Vietnam. Include the application, performance requirements, options, accessories, schedule, delivery city and condition preference.
