Keysight 10076C High Voltage Probe, 100:1, 3.7 kVpk, 500 MHz | Vietnam

Conceptual schematic and setup

Conceptual connection sequence for Keysight 10076C

DUT test point and approved reference → rated probe or tip → compatible probe interface → oscilloscope acquisition

Match the probe, tip and scope interface to the measurement range, bandwidth and loading requirements. Check the applicable voltage, frequency and common mode limits before attaching the probe. Keep the reference path appropriate to the probe design, and verify attenuation and offset settings with a known signal. Record probe, tip and fixture details when comparing results.

The Keysight catalog identifies the model as High Voltage Probe, 100:1, 3.7 kVpk, 500 MHz. Use the documentation to establish the conditions and limits for the selected configuration. Include cables, fixtures, mounting hardware and compatible host options in the quotation where required. Before relying on results, compare a reference device under the same operating conditions.

For sourcing in Vietnam, provide your host model, connection standard, intended test, location, project dates and documentation needs. For service evaluation, include the serial number, symptoms, photographs and results from a known reference setup.

Official Keysight 10076C documentation

Configuration review

Applications and industries

Rental support

Rental can cover a validation campaign, urgent replacement, production ramp, demonstration, field project, training event or temporary capacity increase. Provide dates, duty cycle, site, measurement requirements, fixtures, accessories, interfaces, software, calibration evidence, logistics and return schedule.

Before dispatch, agree on the exact configuration, included cables and accessories, condition, functional checks, packing, insurance, site readiness and return terms. Availability and suitability are confirmed only after technical review.

Repair and calibration evaluation

For repair, send the model and serial number, symptoms, error messages, self-test results, photographs, connector condition, firmware, installed options, recent events, known-good accessory checks and service history. Stop operating equipment that shows smoke, liquid ingress, damaged insulation, abnormal heating or unsafe behavior.

Technical intake separates an instrument fault from cables, fixtures, probes, software, configuration, grounding, facility power, network settings or the device under test. Functional repair and traceable calibration are separate deliverables.

Purchase planning

For sale, state whether new, used, refurbished or an equivalent current model is acceptable. Include performance requirements, interfaces, options, accessories, documentation, calibration, warranty, destination and required delivery date.

Customers replacing an installed unit should share its label, option list, automation commands, fixture details, saved procedures and mechanical constraints. Final acceptance should reference the supplier quotation and current manufacturer documentation.

Cross-brand benchmark

Compare this Keysight model with suitable Rohde & Schwarz, Tektronix, Keithley, Anritsu, NI, Chroma, EA Elektro-Automatik, Rigol or other equipment in the same class. Review range, accuracy, noise, speed, channels or ports, dynamic range, software, licenses, automation, accessories, calibration, warranty, lifecycle and local support.

The best benchmark follows the real test method and integration constraints. A similar headline specification does not guarantee compatible connectors, commands, uncertainty, options, fixtures, throughput or serviceability.

Selection checklist

• Confirm the exact model, serial number, lifecycle, firmware and installed options.
• Define measurement or stimulus range, accuracy, noise, speed, channels, ports and test limits.
• Specify cables, probes, fixtures, adapters, software, licenses and remote interfaces.
• Check facility power, grounding, ventilation, rack space, network and safety requirements.
• State calibration, documentation, warranty, training, installation and delivery needs.
• For repair, include symptoms, self-tests, photographs, history and known-good accessory checks.
• Approve the final quoted configuration before rental, service intake or purchase.

Documentation and acceptance

Define an acceptance checklist covering identity, condition, startup, self-test, installed options, accessories, communications, representative measurements, calibration documents and packing. For automated systems, preserve driver versions, command examples, configuration files and screenshots. For shared laboratories, record users, booking rules, warm-up time, connector care, backup settings and escalation contacts.

Request a Keysight 10076C quote

Contact Lost in HCM for Keysight 10076C rental, repair and sale in Vietnam. Include the application, performance requirements, options, accessories, schedule, delivery city and condition preference.