Filter/ Regulator Unit – PTMFRL

The air filter regulator PTMFRL belongs to the Snap-on pneumatic torque filter/regulator units range, and Lost in HCM supplies it to workshops and factories across Vietnam. Snap-on lists the country of origin as USA.

Air filter regulator PTMFRL overview

Pneumatic torque tools depend on the air that feeds them. The air filter regulator PTMFRL sits between the air line and the tool. So it controls everything that reaches the motor. In addition, it keeps water and dirt out of the gears.

The adjustable lubricator lets you meter the right amount of oil for PTM series tools. Meanwhile, the gauge face shows the working pressure clearly during each job. Lost in HCM supplies this unit with CO/CQ papers and a VAT e-invoice.

Specifications at a glance

The table below follows the Snap-on data for PTMFRL. In addition, we converted imperial torque values to N·m where Snap-on lists none.

How the air filter regulator works

Air from the compressor first passes through the filter bowl. The filter traps dirt and drops out water, so only clean air moves on. Next, the regulator lowers the pressure to the value you set on the knob.

Then the air passes the lubricator, which adds a fine oil mist. That oil coats the motor vanes and gears as the tool runs. Finally, the clean, oiled air flows down the hose to the tool.

Key features of the air filter regulator PTMFRL

The details below explain how clean, steady air protects the tool and helps it repeat. They also show what to check before you add this unit to your pneumatic kit.

• Filter and lubricator combined. Snap-on puts the filter and lubricator in one unit. Therefore, you set up the air supply with fewer parts, fewer joints, and fewer chances for leaks.
• Large pressure gauge. A large gauge lets the operator read and select the right pressure with ease. As a result, setup errors drop when crews change from one bolt size to the next.
• Adjustable oil feed lubricator. The lubricator adjusts to give the proper amount of oil for PTM series tools. So the motor gets enough oil to run smoothly without flooding the exhaust.
• Built for PTM series tools. Snap-on lists this unit for its PTM series pneumatic torque tools. In addition, a matched unit removes guesswork about flow, oil feed, and pressure range.
• Cleaner air for the motor. The filter traps dirt and drops out water before air reaches the tool. That protects motor vanes and gears, which lowers wear and service downtime.
• Steady working pressure. The regulator holds the pressure you set, even when the supply line swings. Because many air torque tools set output by pressure, this helps repeat results.

Snap-on data sheet notes

In addition, the Snap-on data sheet for PTMFRL notes:

• Filter and lubricator in one unit.
• Large pressure gauge allows the operator to easily select the appropriate pressure.
• Adjustable lubricator provides the proper amount of lubrication for PTM Series of tools.

Typical applications

An air filter regulator earns its place wherever a pneumatic torque tool must repeat its output. The tasks below are the most common uses we see from buyers in Vietnam.

• Setting pneumatic tool output. Crews use the gauge to set the pressure that matches their target torque. Therefore, the regulator becomes the main control point for each bolting job.
• Flange bolting on pipe work. Flange jobs run many bolts in a set pattern, often over long shifts. So steady pressure helps each bolt in the pattern get a similar output.
• Wind tower and generator bolts. Tower flanges need high torque on many large bolts in a row. In addition, clean air keeps the tool running smoothly through long service visits.
• Heavy vehicle wheel work. Truck and bus depots run air tools on wheel nuts every day. A filter regulator keeps shop air dry and steady, which protects the tool on busy shifts.
• Site work on long hoses. Remote sites often use long hoses from a portable compressor. For example, placing the unit near the tool lets crews see the real pressure at the job.
• Steel structure bolting. Steel frames need many large bolts at height and in open weather. Meanwhile, the filter removes the water that humid air leaves in the supply line.

Industries that use the air filter regulator PTMFRL

Any sector that runs air torque tools on site can use a filter regulator. So these units show up in refineries, wind farms, mines, and depots. Here is how each industry puts them to work.

• Oil, gas, and petrochemical. Refineries and gas plants run pneumatic torque tools during shutdowns. In Vietnam, coastal sites face salty, humid air, so clean and dry tool air matters even more.
• Wind and power generation. Wind farms in the Mekong Delta and central Vietnam torque large tower flanges. Therefore, service teams pair air torque tools with a filter regulator for steady output.
• Mining and quarrying. Mines in northern Vietnam run air tools from portable compressors in dusty pits. A filter regulator keeps that dust and water out of the tool motor.
• Heavy fleet and transport. Bus and truck depots near Hanoi and Ho Chi Minh City torque wheel nuts daily. In addition, a clear gauge helps each shift set the same pressure.
• Steel structure fabrication. Steel builders in Bac Ninh and Dong Nai bolt large frames with air tools. So they use filter regulators to protect tools and keep output steady.
• Shipbuilding and marine. Shipyards in Hai Phong and Vung Tau work in wet, salty air all year. Meanwhile, the filter drops out water before it can reach the tool gears.

Air filter regulator PTMFRL compared with similar brands

Many makers sell filter, regulator, and lubricator units for compressed air. Most are general-purpose units, while a few match set tool lines. The rows below show where the air filter regulator PTMFRL fits among common choices.

If you run Snap-on PTM series tools, this matched unit is the simplest way to prepare their air. It combines filter, gauge, and lubricator in one. Even so, confirm current specs with each maker before you compare air units. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Confirm that your tool is a Snap-on PTM series model. This unit lists those tools, so check the label before you order.
• Check the air supply your compressor delivers at the site. Then make sure it stays above the pressure your torque chart needs.
• Place the unit close to the tool rather than at the compressor. That way, the gauge shows the pressure the tool really sees.
• Plan hose length and fittings with the unit in mind. Long or narrow hoses can drop pressure, so keep the run as short as you can.
• Use the oil grade that the tool manual lists for the lubricator. For example, the wrong oil can gum up motor vanes over time.
• Keep a spare filter element and bowl seals in the tool kit. In addition, this avoids downtime when a filter clogs on a remote job.

Care, storage and calibration

• Store the unit upright in a clean case or on a rack. Also cap the inlet and outlet ports, because dust in the ports reaches the tool later.
• Drain water from the filter bowl before and after each shift. Then wipe the bowl and gauge clean, and check for cracks or leaks.
• This unit does not measure torque, so ISO 6789 intervals do not apply to it. However, have the gauge and torque tool checked each year, and we can arrange recalibration through an accredited laboratory.
• Never feed the unit above its rated inlet pressure. Too much pressure can damage the bowl, so fit a guard and replace any cracked bowl.
• Pack the unit in a padded case for transport between sites. Meanwhile, drain and dry it during the humid season so water does not sit inside.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.