Deep Well Cup – PTQ1WTCUPD30

The wheel torque cup PTQ1WTCUPD30 belongs to the Snap-on wheel torque cups for pneumatic torque wrenches range, and Lost in HCM supplies it to workshops and factories across Vietnam. Snap-on lists the country of origin as USA. The description (chart) is Deep Well Cup to fit 30 mm lugs.

Wheel torque cup PTQ1WTCUPD30 overview

The wheel torque cup PTQ1WTCUPD30 is a reaction accessory for Snap-on pneumatic torque wrenches on wheel work. Paired with an extension, it creates the reaction point when you torque lug nuts. So trucks and heavy equipment receive controlled torque on every wheel.

Snap-on makes these cups in the USA in two styles, standard and deep well. Standard cups pair with listed Snap-on impact sockets, while deep well cups pair with deep sockets for long studs. Every cup also carries a lifetime warranty on materials and workmanship.

The use with snap-on sockets is SIMM302.

Specifications at a glance

The table below follows the Snap-on data for PTQ1WTCUPD30. In addition, we converted imperial torque values to N·m where Snap-on lists none.

How the wheel torque cup works

The two cup styles, standard and deep well, differ mainly in reach. Standard cups pair with standard-length impact sockets, such as IM482 or IM542. By contrast, deep well cups pair with deep sockets for long studs, such as SIM482 or SIM562.

Two deep well cups instead suit special wheel studs, each with its own matching socket. So check the stud style and nut size before you order a cup. Each product page names the exact Snap-on sockets that pair with each cup.

Key features of the wheel torque cup PTQ1WTCUPD30

The details below explain how these cups support controlled wheel torque on heavy vehicles. They also show what to check before you add a new cup to your setup. In short, start with nut size and stud length.

• Reaction point at the wheel. The cup and extension combine to create a reaction point when you torque lug nuts. As a result, the operator does not hold back the tool's reaction torque by hand.
• Standard and deep well styles. Standard cups suit standard-length impact sockets, while deep well cups suit deep sockets. Therefore, you can match the cup to the stud length on each vehicle.
• Matched to Snap-on sockets. Each cup lists the Snap-on sockets it works with, such as IM482 or SIM562. So buyers can pair cups and sockets without guesswork or trial fitting.
• Metric and inch lug sizes. The range covers metric and inch lugs, including 30 mm, 38 mm, 41 mm, and 1-3/4 inch. In addition, one cup handles both a metric and an inch size in several cases.
• Special wheel stud options. Two deep well cups suit Budd wheel studs in 21 mm and 13/16 inch sizes. That helps mixed fleets that still run some trucks with this older wheel style.
• Built for trucks and heavy equipment. Snap-on designs these cups for lug nuts on trucks and heavy equipment. Thus, they suit the large nuts and high torque values found on commercial wheels.

Snap-on data sheet notes

In addition, the Snap-on data sheet for PTQ1WTCUPD30 notes:

• Wheel cup and extension combine to create reaction point when torquing lug nuts on trucks and heavy equipment.

Typical applications

These cups solve one problem well: giving a pneumatic torque wrench a firm reaction point at the wheel. Below are typical jobs where that matters, from tire service to mining trucks. Each job also rewards a matched cup and socket.

• Truck tire service. Truck tire shops torque lug nuts to spec after every wheel change or rotation. A pneumatic torque wrench with the right cup gives each nut the same controlled value.
• Bus fleet maintenance. City and intercity bus fleets change wheels often and must log torque values. So a cup and pneumatic wrench setup speeds up the job while keeping results consistent.
• Mining and quarry trucks. Haul trucks and loaders use large lug nuts with high torque values. Therefore, the bigger cups suit 41 mm and 1-3/4 inch nuts on this heavy equipment.
• Trailer and dual wheel work. Trailers and dual rear wheels carry many lug nuts per hub. In addition, the deep well cups suit the long studs common on dual wheel setups.
• Construction equipment service. Wheel loaders, graders, and mobile cranes need correct wheel torque before they return to site. As a result, field crews use cup setups to tighten nuts evenly and quickly.
• Re-torque checks after service. Many fleets re-check lug nut torque after the first run following a wheel change. Then the same cup and wrench setup repeats the original torque value.

Industries that use the wheel torque cup PTQ1WTCUPD30

Any sector that runs heavy wheels needs fast and correct lug nut torque. So these cups show up in fleet shops, mines, and ports. Here is how each industry uses them in practice.

• Logistics and trucking. Trucking firms serving industrial parks in Binh Duong and Long An run large fleets of heavy trucks. So they need fast, repeatable wheel torque to keep wheels secure on long routes.
• Public transport. Bus operators in Hanoi and Saigon service many wheels each week. In addition, safety rules push them to record torque, which a controlled pneumatic setup supports.
• Mining and quarrying. Coal and stone operations in northern Vietnam use haul trucks with very large lug nuts. Therefore, crews rely on pneumatic torque tools with reaction cups for wheel service.
• Construction. Contractors on highway and port projects run loaders, dump trucks, and cranes every day. Meanwhile, wheel service often happens on site, so compact cup setups save time.
• Ports and container terminals. Container terminals in Hai Phong and Vung Tau use heavy trucks and handling equipment around the clock. Also, wheel downtime costs money, so fast and correct torque matters.
• Truck dealer workshops. Dealers for FDI truck brands in Vietnam must follow the maker's wheel torque specs. Thus, a matched cup and socket setup helps them meet warranty and audit needs.

Wheel torque cup PTQ1WTCUPD30 compared with similar brands

Truck shops can torque lug nuts with several kinds of tools. Each method differs in speed, accuracy, and effort, so the choice affects daily output. The table shows where the wheel torque cup PTQ1WTCUPD30 and a pneumatic torque wrench fit.

If your shop already runs Snap-on pneumatic torque wrenches, these cups are the natural choice. They match listed Snap-on sockets and carry a lifetime warranty. Even so, confirm current specs with each maker before you compare systems. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Measure the lug nut across its flats before you order. Several cups cover both a metric and an inch size, so check the product page for exact fits.
• Check the stud length on each wheel you service. Long studs need a deep well cup and a deep socket, while short studs suit a standard cup.
• Match the cup to the Snap-on socket listed for it, such as IM562 or SIM482. A wrong pairing can leave a gap and weaken the reaction point.
• Confirm the stud type on your trucks before you order. Special studs need the 21 mm or 13/16 inch deep well cup with its matching socket.
• Plan a cup for each common nut size in your fleet. That way, technicians do not slow down by swapping or borrowing parts during busy shifts.
• Check that your pneumatic torque wrench model accepts these cups before you order. Ask us for the tool manual if you need to confirm the fit.

For other sizes in the same range, compare Standard Cup – PTQ1WTCUP362, Standard Cup – PTQ1WTCUP482, Deep Well Cup – PTQ1WTCPBWD1, Standard Cup – PTQ1WTCUP342. Also browse the full Snap-on torque tools shop for handles, testers and adapters.

Care, storage and calibration

• Store cups with their matching sockets in a labeled drawer or case. Then technicians grab the right pair quickly and avoid mixing sizes.
• Wipe off road grime, grease, and brake dust after each job. Also check the cup for cracks or burrs, because damage can weaken the reaction point.
• Hand torque tools follow a 12-month or 5,000-cycle interval under ISO 6789-1:2017. Check your pneumatic wrench on a similar plan, and we can arrange recalibration through an accredited laboratory.
• Never run the tool above its rated output or use a damaged cup. An overload can crack the cup, so retire any cup with visible cracks or wear.
• Carry cups in a case when you travel to roadside or site jobs. In addition, keep them dry during the rainy season to prevent rust.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.