Specifications, setup and FAQ
Rohde & Schwarz NGA142 is a 2-channel DC power supply with up to 80 W total output. Two higher-voltage outputs support independently powered circuits and flexible bench configurations. Use this guide to compare its capabilities and prepare a rental, repair or purchase enquiry in Vietnam.
NGA142 specifications at a glance
| Model | NGA142 |
|---|---|
| Manufacturer | Rohde & Schwarz |
| Manufacturer order number | 5601.8002.05 |
| Output channels | 2 |
| Total output power | 80 W maximum |
| Voltage per channel | 0 V to 100 V |
| Maximum output current | 2 A per channel |
| Maximum channel power | 40 W per channel |
Check both the 40 W per-channel limit and the 80 W total instrument limit. Maximum voltage and maximum current do not apply simultaneously. For each rail, calculate voltage multiplied by current and compare the result with the permitted operating envelope in the manufacturer specifications.
Choose the right NGA142 configuration
The NGA100 family provides linear outputs, remote sensing and data logging for bench measurements. Confirm the installed interfaces and required options before planning remote control.
Start with a list of the supply rails your device needs. Record the normal voltage, steady current and expected startup current for each rail. Then compare the combined demand with the available power. Leave room for the test conditions you intend to explore, instead of selecting a supply only from one headline rating.
For development work, independent channels can help separate power domains. For a production fixture, also consider connection time, repeatability and how the operator will save the result. If you need an automated sequence, check the actual interface, command support and software environment before committing to a setup.
Typical bench connection schematic
DC output (+) ── rated test lead ── DUT supply input (+) DC output (−) ── return lead ───── DUT supply return (−) Optional sense leads ──────────── DUT sense points
This is a functional connection guide, not an internal circuit diagram or a service schematic. DUT means device under test. Follow the manufacturer’s operating manual for terminal assignments, grounding, remote sensing and any series or parallel connection. Choose leads and fixtures suitable for the current and operating conditions.
Plan a repeatable bench test
- Define the voltage range, current limit and pass criteria before connecting the device.
- Check polarity and connections with the outputs disabled.
- Set the required protection levels for the device and the intended test.
- Enable the output using the documented procedure, then observe the voltage and current.
- Record settings, operating conditions and unexpected behavior with the test result.
Keep the instrument model and serial number with your records. Include the fixture, cable arrangement and firmware when these affect reproducibility. A result is easier to compare when the next engineer can recreate the same conditions. For formal verification, specify the required calibration evidence and measurement uncertainty in advance.
Rental, repair and purchase enquiries in Vietnam
For a NGA142 rental enquiry, provide the project dates, delivery location, required interfaces and accessories. Describe the load and any startup or transient behavior that matters to the test. This helps the team assess whether the proposed configuration suits the work and confirm availability before a booking.
For purchase, request a quotation that identifies the exact model, condition, included accessories, warranty terms and calibration documents. For repair, describe the symptoms and any error messages. Avoid treating a quotation request as confirmation of stock, delivery or repair feasibility; these details depend on the specific equipment offered and the agreed scope.
Explore our Lost in HCM equipment and service enquiries. For technical reference, consult the official Rohde & Schwarz NGA100 product information. The manufacturer’s manual and applicable specifications govern operation.
NGA142 FAQ
How many outputs does the NGA142 have?
The NGA142 has 2 output channels, each adjustable from 0 V to 100 V. The instrument has a maximum combined output power of 80 W.
Can the NGA142 deliver maximum voltage and current together?
No. The output must remain within its power limits: 40 W per channel, with 80 W total for the instrument. Calculate voltage multiplied by current for each intended load.
Can I request a NGA142 rental in Vietnam?
Send the required dates, delivery location, channel requirements and documentation needs to Lost in HCM. Rental availability and the supplied configuration must be confirmed in a quotation.
What should I provide for a NGA142 repair enquiry?
Provide the serial number, fault description, error messages and photographs. Repair feasibility, parts, cost and turnaround are confirmed after assessment.
What is the manufacturer order number for NGA142?
The manufacturer lists order number 5601.8002.05. Optional interfaces, rack accessories and other additions must be specified separately.
