3/8″ Drive Newton Meter Adjustable Click-Type Fixed Ratchet Torque Wrench (5-25 N•m) – QD2RN25B

The metric click-type torque wrench QD2RN25B belongs to the Snap-on Newton meter adjustable click-type torque wrenches range, and Lost in HCM supplies it to workshops and factories across Vietnam. Because it has a 3/8 in square drive, it pairs with standard 3/8 in sockets. Snap-on lists its working range as 5-25 N•m.

Metric click-type torque wrench QD2RN25B overview

Most drawings in Vietnamese FDI plants list torque in N•m, not in US units. The metric click-type torque wrench QD2RN25B matches those drawings, because its scale shows N•m only. As a result, operators skip the conversion step and avoid a common source of error.

Each model has a fixed ratchet head that sits rigidly in line with the torque body. In addition, the 3/8 and 1/2 inch models use an 80-tooth ratchet with a 4.5 degree swing arc. That fine swing helps in tight engine bays.

The us patent is (#4,934,220 and #6,125,722). Snap-on lists the country of origin as USA. The storage case is PBQD2.

The head style is Compact Ratchet. The gear teeth is 36. The head depth is 7/16 inches.

The length is 11-3/4 inches.

Specifications at a glance

The table below follows the Snap-on data for QD2RN25B. In addition, we converted imperial torque values to N·m where Snap-on lists none.

How the metric click-type torque wrench works

An adjustable click-type wrench holds a spring-loaded release inside the torque body. You set the value on the N•m scale, so the release preload matches your target. Then, as you pull, the load rises until the release trips with a click.

First, you set the target value and lock the setting as the manual shows. Next, you fit the socket and pull smoothly at the center of the grip. Finally, you stop as soon as you feel the click, because pulling on adds extra torque.

Key features of the metric click-type torque wrench QD2RN25B

The details below explain why this line suits metric plants and tight spaces. They also show what to check before you add a new range or drive size to your tool list.

• Direct N•m scale. The scale reads in newton meters, which matches metric drawings and service manuals. Therefore, operators set the value straight from the spec sheet instead of converting from US units.
• ±4% accuracy class. Snap-on places this family in its ±4% accuracy class. So you should pick a range that puts your target well inside the scale, rather than at the very bottom.
• Eight ranges up to 1,500 N•m. Ranges start at 1 to 6 N•m and climb to 300 to 1,500 N•m. As a result, one line covers fine sensor screws, wheel nuts, and large structural bolts.
• Five drive sizes. The family uses 1/4, 3/8, 1/2, 3/4, and 1 inch square drives. In addition, each drive pairs with ranges that suit typical sockets of that size.
• Fine setting increments. Low-range models step in 0.05 or 0.1 N•m, while mid-range models step in 0.5 or 2 N•m. Meanwhile, the largest models step in 5 or 10 N•m.
• 80-tooth fine ratchet. The 3/8 and 1/2 inch models use an 80-tooth ratchet with a 4.5 degree swing arc. Because of this, you can work in tight spaces with short handle strokes.

Typical applications

A metric click wrench earns its place where drawings list N•m and every joint needs a clear stop. The tasks below are the most common uses we see from buyers.

• Metric engine assembly. Engine plants tighten cylinder head, cover, and bracket bolts to N•m values. A direct N•m scale removes conversion, so each operator sets the drawing value without extra steps.
• Electronics and sensor mounting. Small sensors, terminals, and connectors need low torque in the 1 to 25 N•m band. Therefore, the 1/4 inch models suit these jobs with fine 0.05 or 0.1 N•m steps.
• Wheel and chassis bolts. Wheel nuts and chassis bolts on most Asian and European vehicles use N•m specs. For example, the 1/2 inch models up to 350 N•m cover most passenger car wheel values.
• Heavy flanges and structures. Large flanges, bases, and frames need high torque on big metric bolts. So the 3/4 and 1 inch models, with ranges up to 1,500 N•m, suit these heavy joints.
• Production line final torque. Assembly lines use click wrenches to confirm the last turn on key joints. Also, the click gives each operator the same clear stop, even on a noisy floor.
• Maintenance and overhaul work. Maintenance teams reinstall pumps, gearboxes, and motors to metric torque specs after service. In addition, a range of drives lets one crew handle small covers and large mounts.

Industries that use the metric click-type torque wrench QD2RN25B

Metric click wrenches matter wherever drawings list torque in newton meters. The industries below rely on them every day. Many of these teams also work in FDI plants and industrial parks across Vietnam.

• Automotive and motorcycle plants. Vehicle and motorcycle plants in Vinh Phuc, Hai Phong, and Dong Nai build to metric drawings. So N•m wrenches help these FDI lines set values straight from the spec sheet.
• Electronics manufacturing. Electronics plants in Bac Ninh and Thai Nguyen tighten small fasteners on frames and fixtures. Therefore, low-range 1/4 inch models give the fine control these jobs need.
• Heavy equipment maintenance. Excavators, cranes, and loaders from Japan and Europe use large metric bolts. For this reason, construction and mining teams in Vietnam use 3/4 and 1 inch models for high torque.
• Energy and power plants. Turbines, pumps, and generator sets need careful torque on flanges and base bolts. Meanwhile, power plant crews in Vietnam use high-range wrenches to meet the values in maintenance manuals.
• Factory maintenance. Plants across Binh Duong and Long An run Japanese, Korean, and European machines. Maintenance teams also need tools that leave a clear torque record for ISO audits.
• Steel and structural work. Steel fabricators and structural crews tighten large bolts on frames and supports. In addition, a 1 inch wrench up to 1,500 N•m covers heavy joints without a torque multiplier.

Metric click-type torque wrench QD2RN25B compared with similar brands

Before you buy, it helps to compare the metric click-type torque wrench QD2RN25B with other metric click wrenches. The key questions are range, head style, and service approach. So the rows below compare well-known lines on design rather than on price.

Choose this Snap-on line when you want an N•m scale, a fixed ratchet, and a wide range of drives. It also suits plants that already use Snap-on tools. Even so, confirm current specs with each maker before you compare ranges. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Pick a range that places your target in the middle of the scale. Accuracy is best away from the bottom, so avoid settings near the minimum.
• Match the drive size to your sockets before you order. For example, 1/4 inch models suit small sockets, while 3/4 and 1 inch models suit heavy sockets.
• Check the space around each fastener before you choose a head. The 80-tooth ratchet on 3/8 and 1/2 inch models needs only a 4.5 degree swing to move the bolt.
• Consider the length of high-range models before you buy. The 1 inch model is about 68 inches long, so plan room for the pull.
• List every torque value on your drawings before you choose. That way, you can cover the whole list with the fewest wrench ranges.
• Note the ratchet service kit listed on each product page. Then your team can order the right kit when a ratchet needs service later.

For other sizes in the same range, compare 1/2" Drive Newton Meter Adjustable Click-Type Fixed Ratchet Torque Wrench (40–200 N•m) – QD3RN200A, 1" Drive Newton Meter Adjustable Click-Type Fixed Ratchet Torque Wrench (300–1,500 N•m) – QD5RN1500A, 1/4" Drive Newton Meter Adjustable Click-Type Fixed Ratchet Torque Wrench (1-6 N•m) – QD1RN6B, 3/8" Drive Newton Meter Adjustable Click-Type Fixed Ratchet Torque Wrench (20–100 N•m) – QD2RN100A. Also browse the full Snap-on torque tools shop for handles, testers and adapters.

Care, storage and calibration

• Store the wrench in its case or a padded drawer when you finish. Also follow the manual on the storage setting, because the spring rests better at low load.
• Wipe off oil, coolant, and grease with a dry cloth after each job. In addition, keep solvents off the scale so the markings stay easy to read.
• Recalibrate every 12 months or 5,000 cycles, as ISO 6789-1:2017 recommends. We can arrange recalibration through an accredited laboratory, while warranty work goes to a Snap-on Repair Center.
• Never use the wrench as a breaker bar or pull past the click. Overload can shift the setting, so check the tool after any drop or hard hit.
• Carry the wrench in its case between sites and keep it dry in the humid season. Then let it reach room temperature before precise work.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.