Tektronix P7720 TriMode Differential Probe

The Tektronix P7720 rental Vietnam service from Lost in HCM gives engineering teams in Vietnam short-term access to this oscilloscope probe, with sale and service options on request.

Tektronix P7720 rental Vietnam overview

A Tektronix P7720 rental Vietnam connects your circuit to the oscilloscope without changing what you measure. That matters because the probe sets the real bandwidth, loading, and safety of every reading. So the right probe often decides whether a waveform tells the truth.

This family covers Tektronix passive, active, differential, and high-voltage probes. It also includes power rail probes, IsoVu isolated tips, optical converters, logic probes, and accessories. First, passive probes suit general bench work and service tasks. Next, active and TriMode probes handle fast edges, while isolated probes serve wide-bandgap power designs.

Tektronix P7720 rental Vietnam: about the P7720

Tektronix P7720 rental Vietnam: tektronix P7720 overview

The Tektronix P7720 is a 20 GHz P7700 series TriMode probe. Match the TekConnect oscilloscope, TekFlex tip and measurement mode to the required signal bandwidth.

Tektronix P7720 rental Vietnam: product images

Tektronix P7720 rental Vietnam: specifications

Manufacturer	Tektronix
Model	P7720
Product type	TriMode Differential Probe
Bandwidth	20 GHz typical; tip and mode dependent
Rise time, 10–90%, typical	27 ps with applicable tips and measurement mode
Oscilloscope interface	TekConnect; verify exact instrument, software and probe support
Accessory connector	TekFlex
Active solder-in tip attenuation	4X
Active solder-in differential input resistance	100 kΩ
Selected active-tip differential capacitance	0.4 pF; see tip-specific data
Solder-in differential input range	5 V peak-to-peak
Solder-in operating voltage window	±5.25 V
20 GHz configuration	Selected tips in differential or single-ended mode; common-mode bandwidth is 19 GHz

Tektronix P7720 rental Vietnam: measurement applications

Compare differential, single-ended and common-mode views at suitable low-voltage test points. The selected tip affects loading, range and available bandwidth. Use the same physical connection when comparing supported modes so connection changes do not obscure waveform differences.

Connection schematic

DUT signal A ── tip input A ┐
                           ├── compatible TekFlex tip ── P7720
DUT signal B ── tip input B ┘
P7720 ── supported TekConnect oscilloscope
Select a measurement mode supported by the attached tip

Illustrative application connection schematic. Follow the current manufacturer manual for installation, connection ratings, grounding and accessory selection. Verify the limits of every component in the measurement path. Teams in Vietnam often choose Tektronix P7720 rental for this reason.

Setup and compatibility

Verify the exact oscilloscope and firmware in the manufacturer compatibility information. TekConnect connector presence alone does not establish compatibility with older instruments. Tip-specific limits apply; the table identifies solder-in conditions rather than treating every accessory as electrically identical.

Request a quotation in Vietnam

Request a quotation for Tektronix P7720. Include the oscilloscope model, waveform bandwidth, expected voltage/current, connection geometry and required accessories. Price, condition and local availability are confirmed individually.

Manufacturer reference

Official Tektronix datasheet. Reviewed 21 October 2026. Consult the full document for test conditions, tip-specific performance and frequency derating.

How the oscilloscope probe works

TriMode probes from Tektronix measure differential, single-ended, and common-mode signals through one tip connection. So engineers can switch modes from the scope without moving the probe. That saves time and solder joints on dense boards with fine-pitch parts. This applies to every Tektronix P7720 rental we arrange in Vietnam.

IsoVu probes break the ground path with an optical, fiber-based link. Therefore, they reject the large common-mode swings found in half-bridge and GaN circuits. Meanwhile, optical converters turn light signals into voltage for the scope. Logic probes also add digital channels next to the analog inputs.

What to look for in an oscilloscope probe

Before you rent or buy, note the signal speed, voltage level, and ground reference. Then check which scope interface your bench uses. Next, the features below explain what to compare, from bandwidth and loading to ratings and accessories.

• Bandwidth and rise time. The probe and scope together set the system bandwidth. So choose a probe rated well above your fastest edge, because a slow probe rounds edges and hides overshoot.
• Low circuit loading. Every probe adds resistance and capacitance to the circuit under test. Therefore, low-capacitance active probes suit fast or high-impedance nodes, while passive probes suit general bench work. So, plan it early when you book a Tektronix P7720 rental in Vietnam.
• Voltage rating and safety category. High-voltage probes list a maximum input and a CAT rating for each range. So check both against your circuit before you connect, especially on mains and inverter work.
• Differential and common-mode rejection. Differential probes measure between two points that both float above ground. As a result, good common-mode rejection matters, and isolated IsoVu probes push that rejection further on fast switching nodes.
• Scope interface and compatibility. Probes connect through BNC, TekVPI, TekConnect, or other maker interfaces. Therefore, confirm that the probe, any adapter, and your scope model work together before you plan a test.
• Tips, adapters, and accessories. Tips, cables, and adapters change how a probe reaches the circuit. For example, solder-in tips, SMA adapters, and MMCX tips suit different boards, so plan accessories with the probe. Our Tektronix P7720 rental units in Vietnam ship ready for this kind of work.

Typical applications

Probes appear on every bench where an oscilloscope runs. Also, the tasks below cover most rental and purchase requests in Vietnam. They range from simple board checks to wide-bandgap power design and high-speed serial validation.

• Power converter and inverter design. Switching stages create fast edges on nodes that float far above ground. So engineers use high-voltage differential or isolated probes to view gate drives and switch nodes safely.
• Wide-bandgap GaN and SiC testing. GaN and SiC devices switch very fast with large common-mode swings. Therefore, isolated probes with shunt tips help teams measure high-side signals and currents with less distortion.
• High-speed serial validation. Serial lanes such as PCIe and USB need high-bandwidth differential probing and low loading. For example, TriMode probes with solder-in tips capture eye diagrams without reworking the board between modes. Rental of the Tektronix P7720 is available across Vietnam.
• Power rail and ripple checks. Modern processors run on low-voltage rails with tight noise limits. As a result, low-noise probes with offset let engineers see small ripple on top of a DC level.
• Optical link testing. Fiber transceivers and optical modules send data as light, not voltage. So optical-to-electrical converters let a scope show pulse shape and eye patterns from those lanes.
• Embedded and mixed-signal debug. Firmware bring-up often needs digital buses and analog rails on one timebase. Therefore, logic probes add digital channels, while passive probes cover clocks, resets, and analog rails.

Industries that use the Tektronix P7720 rental Vietnam

A scope is only as useful as the probe on its input. That is why probes appear in labs, factories, and service centers across Vietnam. So here is how each sector uses them in daily work. Teams in Vietnam often choose Tektronix P7720 rental for this reason.

• Electronics manufacturing services. EMS and ODM plants in northern and southern industrial parks run many test and rework benches. Therefore, they keep passive and active probes on hand and rent extra sets when a new product ramps.
• Power electronics and inverters. Makers of chargers, solar inverters, and motor drives work on fast, high-voltage switching. As a result, they rely on high-voltage differential and isolated probes for safe, clear readings.
• Automotive and EV. Vehicle electronics, battery systems, and EV traction drives need validation in the lab and on test rigs. For example, teams probe CAN lines, gate drives, and sensor outputs with suitable probes.
• Semiconductor and high-speed design. Chip, module, and high-speed board teams measure fast edges and signal integrity. So they pair high-bandwidth scopes with TriMode probes, solder-in tips, and optical converters. This applies to every Tektronix P7720 rental we arrange in Vietnam.
• Telecom and data center hardware. Network gear and optical modules combine fast electrical lanes with fiber links. Therefore, these teams use differential probes and optical-to-electrical converters side by side in the lab.
• Education and research. Universities and research institutes in Vietnam teach and test circuits in hands-on labs. Meanwhile, research projects often need a special probe for a few weeks, so rental fits well.

Tektronix P7720 rental Vietnam compared with other brands

Several makers build probe families for every voltage and speed range. However, each takes its own approach to bandwidth, isolation, and scope interface. The rows below show where the Tektronix P7720 rental Vietnam sits among other common probe choices in Vietnam labs.

If your bench already runs Tektronix scopes, these probes need little new training or adapters. Other makers offer strong probe lines for the same work too. Even so, confirm current specs with each maker before you compare. Specifications change, so confirm current data with each maker before you decide.

Rent or buy?

Rent a probe for a design sprint, a compliance test, or a failure analysis. High-end probes such as TriMode and isolated models suit rental well, because teams need them for weeks, not years. Then you return them, so capital stays free for other work.

Selection tips

• Start with the ground reference of the signal you need to measure. If neither point sits at ground, choose a differential or isolated probe instead of a passive one. So, plan it early when you book a Tektronix P7720 rental in Vietnam.
• Choose probe bandwidth well above your fastest edge, because probe and scope together set system bandwidth. Also check the rise time in the maker's data.
• Check the maximum input voltage and CAT rating against your circuit. So you stay inside safe limits on mains, battery, and inverter work.
• Confirm the probe interface, such as BNC, TekVPI, or TekConnect, on your scope. Otherwise you may need an adapter, which can limit bandwidth or features.
• Plan tips and accessories with the probe itself. For example, solder-in tips, MMCX tips, and SMA adapters each suit a different test point.
• Pick low-capacitance active probes for fast or high-impedance nodes. Then keep passive probes for general bench work, where their range and toughness help most. Our Tektronix P7720 rental units in Vietnam ship ready for this kind of work.

Handling and care

• Handle probe tips and cables gently, and never pull a probe by its cable. Also store tips and adapters in their cases, because they bend and break easily.
• Wear an ESD strap before you touch active, TriMode, or isolated probe heads. Their input stages are sensitive, so static can damage them in an instant.
• Allow active probes and the scope to warm up as the manual advises. Next, compensate passive probes and run any deskew or offset routines before precise work.
• Follow the calibration interval each maker states for active and high-voltage probes. Rental units ship with a valid calibration certificate, and we can arrange service through the maker or an authorized partner.
• Ship probes in padded cases with cables coiled loosely and tips capped. In addition, keep fiber-based isolated probes dry and free of tight bends during Vietnam's humid wet season. Rental of the Tektronix P7720 is available across Vietnam.

Frequently asked questions

Request a quote

Tell us the model, options, dates and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669. Teams in Vietnam often choose Tektronix P7720 rental for this reason.