Tektronix TBS1072C 70 MHz 2-Channel Digital Oscilloscope

The Tektronix TBS1072C rental Vietnam service from Lost in HCM gives engineering teams in Vietnam short-term access to this oscilloscope, with sale and service options on request.

Tektronix TBS1072C rental Vietnam overview

Every electronic design needs proof that its signals look right. The Tektronix TBS1072C rental Vietnam gives that proof with captured waveforms, measurements, and decoded data. Then the team can find root causes faster, while saved screens support reports for customers.

Lost in HCM offers these scopes and probes for rent or sale on a quote basis. Rental units ship with a valid calibration certificate. In addition, we can arrange service through the manufacturer or an authorized partner for units you own.

Tektronix TBS1072C rental Vietnam: about the TBS1072C

Tektronix TBS1072C rental Vietnam: tektronix TBS1072C overview

The TBS1072C brings 70 MHz bandwidth and two analog channels to everyday bench measurements. It is a practical choice for observing sensor outputs, low-voltage control signals and timing relationships during electronics teaching or circuit troubleshooting.

Tektronix TBS1072C rental Vietnam: specifications

Manufacturer	Tektronix
Model	TBS1072C
Series	TBS1000C
Channels	2
Analog bandwidth	70 MHz
Maximum sample rate	1 GS/s
Record length	20,000 points
Vertical resolution	8 bits
Display	7-inch WVGA color display
Standard passive probes	TPP0100, one per channel

Specifications above describe the manufacturer model. The exact delivered configuration, probes, calibration status and included accessories must be confirmed in the quotation.

Tektronix TBS1072C rental Vietnam: measurement applications

A 20,000-point record helps you inspect captured events, while the front-panel controls keep timebase, trigger and vertical adjustments close at hand. Choose probes whose bandwidth and voltage ratings match the measurement, and compensate passive probes before taking measurements. Teams in Vietnam often choose Tektronix TBS1072C rental for this reason.

Tektronix TBS1072C rental Vietnam: connection schematic

Low-voltage circuit test point → rated probe tip → TBS1072C CH1
Circuit reference → probe reference lead → instrument reference
Second test point → second rated probe → CH2

This is an illustrative measurement connection schematic, not an internal service circuit diagram. Confirm the instrument and probe grounding requirements in the manual. A conventional passive-probe ground lead must not be connected to a live mains conductor or an arbitrary floating node. Use a correctly rated differential or isolated measurement system when required.

Product images and connections

Request a quotation in Vietnam

Contact Lost in HCM with model TBS1072C, your application, required accessories and preferred delivery date. Pricing, availability and any rental or service arrangement are confirmed individually before an order is accepted.

Manufacturer reference

Tektronix TBS1000C official specifications and ordering information. Reviewed 19 October 2026.

How the oscilloscope works

A digital oscilloscope samples the input signal many times each second. First, the probe and front end scale the signal. Then a converter turns each sample into a number, so the scope can draw the waveform. This applies to every Tektronix TBS1072C rental we arrange in Vietnam.

A trigger tells the scope when to capture, such as on a rising edge. As a result, repeating signals stay stable on the display. Meanwhile, deep memory lets the scope store long records at full sample rate for later review.

What to look for in an oscilloscope

Oscilloscopes vary widely in bandwidth, resolution, and features. The right model depends on your signals and how you debug them. Therefore, the points below help you match a scope to your circuits, probes, and test plan.

• Bandwidth for your signals. Entry models start at 50 MHz, while mid-range models run past 1 GHz. So pick a bandwidth well above your fastest signal. That margin keeps edges and timing accurate on screen.
• High vertical resolution. Resolution sets how much detail you see on small signals. For example, the Rigol DHO4204 and Tektronix MSO44B offer 12 bits. Meanwhile, the R&S RTB2004 and RTM3004 offer 10 bits for clearer power rail views. So, plan it early when you book a Tektronix TBS1072C rental in Vietnam.
• Deep acquisition memory. Deep memory keeps the sample rate high on long captures. The DHO4204 offers 500 Mpts, while the RTM3004 offers 80 Mpts. Therefore, you can record long sequences without losing detail.
• Channels and logic inputs. Most models here offer two or four analog channels. Mixed signal models add logic inputs, such as 16 channels on the MSOX4154A. As a result, you can debug buses and analog signals together.
• Built-in tools and decode. Many scopes add serial decode, a function generator, or a spectrum view. For instance, the MDO34 includes a spectrum analyzer, while the DSOX1204G adds a generator. These tools also save bench space and cost.
• Probes that match the scope. Probes also shape what the scope really sees. So R&S active probes, such as the RT-ZD and RT-ZS models, extend reach for fast signals. Modular RT-ZM probes also accept a range of tips. Our Tektronix TBS1072C rental units in Vietnam ship ready for this kind of work.

Typical applications

Each application uses the scope to see what a signal really does. Then engineers compare that view with the design intent. Here is how teams in Vietnam use these scopes in labs, factories, and service centers every day.

• Power supply debugging. Switch-mode supplies create ripple, noise, and fast switching edges. So engineers use high-resolution scopes to see small details on each rail. This helps them meet noise limits before release.
• Embedded firmware bring-up. New boards need checks on clocks, resets, and serial buses. Therefore, mixed signal scopes with decode show timing and data together. Then firmware teams can find faults much faster.
• Intermittent glitch hunting. Rare glitches can crash a system once a day. A fast update rate, like 1M wfms/s on the DSOX3024G, raises the chance of catching them. Deep memory then stores the whole event for review. Rental of the Tektronix TBS1072C is available across Vietnam.
• Motor drive and EV diagnostics. Drives and vehicle systems switch high currents at speed. For example, engineers check gate signals and phase currents with suitable probes. Portable scopes like the MSO24 also work in the field.
• EMI and wireless troubleshooting. Wireless modules and noisy circuits need time and frequency views. So the MDO34 shows RF spectrum next to analog and digital signals. As a result, engineers link noise to its source.
• Training and production checks. Training rooms and QC benches need simple, reliable scopes in quantity. Entry models like the DS1054Z, TBS1102C, and EDUX1052G suit that role. They also keep the rental budget modest for large groups.

Industries that use the Tektronix TBS1072C rental Vietnam

Every product with a circuit board needs signal checks at some stage. That is why scopes appear in labs, factories, and service centers. Here is how each sector in Vietnam uses them in design, production, and repair work. Teams in Vietnam often choose Tektronix TBS1072C rental for this reason.

• Electronics manufacturing services. EMS plants in Bac Ninh, Bac Giang, and Binh Duong debug boards for many brands. So they keep scopes on test and repair benches. They also rent extra units during production ramps.
• Power electronics. Makers of supplies, chargers, and inverters need clean views of fast switching. Therefore, they use high-resolution scopes with suitable probes. This helps them pass efficiency and noise tests.
• Automotive and EV. Vehicle electronics and EV systems need validation in labs and vehicles. For example, teams check CAN buses, gate drives, and sensors. Portable and 12-bit scopes both play a role.
• Semiconductor and high-speed design. Chip and high-speed board teams measure fast edges and signal integrity. So they pair higher-bandwidth scopes with active probes. Modular probe systems also cover many tip styles. This applies to every Tektronix TBS1072C rental we arrange in Vietnam.
• Industrial automation. Factories run PLCs, drives, and sensors that sometimes fail without warning. As a result, maintenance engineers use scopes to trace faults. Portable models help them work at the machine.
• Education and training. Universities and training centers in Vietnam teach circuits with hands-on labs. Therefore, they need many reliable entry scopes at once. Rental helps them equip a lab for a single course.

Tektronix TBS1072C rental Vietnam compared with other brands

Many makers build oscilloscopes for every budget and bandwidth. Each takes a different approach to resolution, memory, and software. The rows below show where the Tektronix TBS1072C rental Vietnam sits among other common choices on the market.

Pick the scope that matches your bandwidth and resolution needs first. Then compare memory, channels, probes, and software side by side. Meanwhile, keep in mind that specs change over time, so confirm current specs with each maker. Specifications change, so confirm current data with each maker before you decide.

Rent or buy?

Rent a scope for a design project, a production ramp, a failure analysis, or a training course. Rental also gives access to high-bandwidth models and active probes for short jobs. Then you return them, so your capital stays free for other needs.

Selection tips

• Choose a bandwidth several times higher than your fastest signal frequency. So edges and timing stay accurate on screen and in measurements.
• Pick a 10-bit or 12-bit scope for power rails and small signals. Otherwise, an 8-bit scope may hide ripple and noise in its own noise floor. So, plan it early when you book a Tektronix TBS1072C rental in Vietnam.
• Count the analog and digital channels you need at once. For example, bus debug often needs logic channels next to two analog inputs.
• Check memory depth when you need long captures. Deep memory keeps the sample rate high, so you can zoom in on detail after the capture ends.
• Plan probes with the scope, because the probe limits what you see. Also choose high-voltage or differential probes for power work.
• List the buses you must decode, such as I2C, SPI, CAN, or UART. Then confirm the scope has the matching decode options installed.

Handling and care

• Wear an ESD strap and handle active probe tips with care. Also store tips and modules in their cases, because they break easily.
• Respect the input limits of every channel and probe. Then use proper high-voltage or differential probes on mains and power circuits. Our Tektronix TBS1072C rental units in Vietnam ship ready for this kind of work.
• Let the scope warm up for the time the maker states before precise measurements. Next, run probe compensation or calibration routines as the manual says.
• Follow the calibration interval each maker states, which is often one year. Rental units ship with a valid calibration certificate. Also, we can arrange service through the maker or an authorized partner.
• Ship scopes and probes in padded cases with probes coiled loosely. In addition, keep them dry during Vietnam's humid wet season.

Frequently asked questions

Request a quote

Tell us the model, options, dates and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669. Rental of the Tektronix TBS1072C is available across Vietnam.