1/4″ Drive SAE Adjustable Click-Type Fixed Ratchet Torque Wrench (40–200 in-lb) – QD1R200A

The click-type torque wrench QD1R200A belongs to the Snap-on US-scale click-type torque wrenches range, and Lost in HCM supplies it to workshops and factories across Vietnam. Because it has a 1/4 in square drive, it pairs with standard 1/4 in sockets. Snap-on lists its working range as 40–200 in-lb.

Click-type torque wrench QD1R200A overview

The click-type torque wrench QD1R200A is an adjustable click wrench with a US-reading scale for precise fastener work. You set the value on the handle, then pull until the wrench clicks. As a result, every bolt in a job gets the same known torque.

This Snap-on family covers 1/4, 3/8, and 1/2 inch drives. The smallest models start at 10 in-lb, while the largest reach 2,500 in-lb or 250 ft-lb. In addition, you can choose a fixed head, a fixed ratchet, a compact ratchet, or a flex ratchet.

The us patent is (#4,934,220 and #6,125,722). The gear action is 10°. Snap-on lists the country of origin as USA.

The storage case is PBQD1. The head style is Fixed Ratchet. The description/application is 40–200 in-lb torque.

The gear teeth is 36.

Specifications at a glance

These figures come from the Snap-on listing for QD1R200A. Values marked “calculated” are unit conversions we added for convenience.

How the click-type torque wrench works

A click wrench holds a spring, a cam, and a pivoting head inside its tube. When you turn the handle, the spring presses harder on the cam. Then, at the set torque, the cam trips and the head breaks over with a sharp click.

First, unlock the handle and turn it until the scale shows your value. Next, lock it, fit the socket, and pull the handle smoothly at a right angle. Finally, stop as soon as you feel and hear the click, because extra pull adds torque.

Key features of the click-type torque wrench QD1R200A

The details below explain why these wrenches repeat well and last in daily use. They also show what to check before you choose a range, a head style, and a warranty term.

• Inch-pound adjustable scales. Most models read in in-lb, with steps from 0.5 to 10 in-lb. So you can set small values for electronics, sensors, and light covers without converting from foot-pounds.
• Three drive sizes covered. The family spans 1/4, 3/8, and 1/2 inch square drives. As a result, one family covers bench work, engine work, and heavier assembly with one click feel.
• Low-friction Hour Glass cam. The cam touches less of the inner tube wall than a plain design. Because friction drops, the wrench releases at a steadier point and gives repeatable results over time.
• Sealed ratchet heads. Ratchet models use a high-strength sealed head that keeps out dirt and moisture. In addition, Snap-on describes these heads as virtually maintenance-free in normal shop use.
• Choice of head styles. You can pick a fixed head, a fixed ratchet, a compact ratchet, or a flex ratchet. That way, the wrench matches the fastener access on each job instead of forcing extra adapters.
• Fine swing arc options. Models with an 80-tooth gear move in a 4.5° arc, while others list 10° or 11°. Therefore, the fine-tooth heads work better in engine bays and tight housings.

Snap-on data sheet notes

In addition, the Snap-on data sheet for QD1R200A notes:

• Virtually maintenance-free sealed ratchet heads keep out dirt and moisture.
• Cannot be accidentally disassembled if wound down past scale.
• Accurate readings to ±4% CW and ±6% CCW from 20% of full scale to full scale.

Typical applications

A US-scale click wrench earns its place where a few in-lb make the difference. The tasks below are the most common uses we see from buyers. Each one also rewards a known, repeatable value.

• Electronics and enclosure screws. Small screws on enclosures, panels, and connectors strip easily when overtightened. A 10 to 50 in-lb model gives fine steps, so operators hit the value without damaging threads.
• Engine covers and intake bolts. Valve covers, intake manifolds, and oil pans often call for low torque in in-lb. For example, a 40 to 200 in-lb ratchet model suits these bolts in a crowded engine bay.
• Sensors and small fittings. Temperature sensors, pressure switches, and small fittings need a firm seal without cracked threads. Therefore, technicians use a light in-lb wrench to tighten them to the stated value.
• Aircraft and component maintenance. Aircraft panels and component hardware use inch fasteners with tight torque limits. Because the scale reads in in-lb, mechanics can match the maintenance manual without unit conversion.
• Production line assembly. On assembly lines, operators repeat the same joint hundreds of times per shift. A click wrench gives a clear signal at each joint, so supervisors can trust every tightened fastener.
• Brackets and suspension bolts. The larger 1/2 inch models reach 2,500 in-lb or 250 ft-lb. As a result, they also handle brackets, mounts, and suspension bolts in a service bay.

Industries that use the click-type torque wrench QD1R200A

Inch-pound click wrenches matter wherever small fasteners need exact, repeatable torque. The industries below rely on them every single day. Many of these teams also work in FDI plants and service centers across Vietnam.

• Automotive service. Dealers and fleet shops torque covers, sensors, and brackets to in-lb specs daily. In Vietnam, many FDI service centers follow US or Japanese manuals, so a US-scale wrench avoids conversion errors.
• Electronics manufacturing. Electronics plants in Bac Ninh and Thai Nguyen tighten many small screws on housings and fixtures. Therefore, quality teams use light click wrenches to set and check low values.
• Aviation maintenance. MRO teams at Vietnamese airports work from manuals that list torque in in-lb. A calibrated click wrench with a certificate also supports the records these teams must keep.
• Machinery and equipment assembly. Plants in Binh Duong and Dong Nai assemble pumps, gearboxes, and machine guards. So maintenance and assembly crews use click wrenches to repeat the same joint on every unit.
• Motorcycle and small engines. Vietnam has a huge motorcycle market with many engine and service workshops. Small engine bolts need low, exact torque, which is why in-lb models suit these benches well.
• Energy and utilities. Power plants and substations torque terminals, covers, and instrument fittings during planned outages. In addition, their audit systems often require a calibration certificate for each wrench.

Click-type torque wrench QD1R200A compared with similar brands

Many makers sell adjustable click wrenches with inch-pound scales. Each brand takes its own approach to scale design, ratchet heads, and service. The comparison below shows where the click-type torque wrench QD1R200A fits among common choices that buyers in Vietnam ask about.

Snap-on QD and QE wrenches suit teams that work from US manuals and need fine in-lb steps. Other brands may fit better where a plant already runs their tooling. Even so, confirm current specs with each maker before you compare ranges. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Pick a range where your target value sits between 20 and 100% of full scale. Below 20%, accuracy is not stated for these wrenches.
• Match the scale unit to your spec sheet. If your manual lists in-lb, choose an in-lb model instead of converting from foot-pounds.
• Choose a fixed head when you need the slimmest profile on a single bolt. Otherwise, a ratchet head saves time on rows of fasteners.
• Check the swing arc when space is tight. For example, an 80-tooth head moves in 4.5°, while a 36-tooth head needs 10°.
• Compare the warranty terms on each page before you order. QD and GQT models carry one year at a Snap-on Repair Center, while QE models carry two years.
• Plan two wrenches when your jobs span very low and higher values. That way, each value stays inside the accurate band of one wrench.

For other sizes in the same range, compare 3/8" Drive SAE Adjustable Click-Type Fixed Torque Wrench (200–1,000 in-lb) – QD21000A, 1/2" Drive SAE Adjustable Click-Type Fixed Ratchet Torque Wrench (500–2,500 in-lb) – QD3R2500A, 3/8" Drive SAE Adjustable Click-Type Fixed Ratchet Torque Wrench (40–200 in-lb) – GQT2R200NP, 3/8" Drive SAE Adjustable Click-Type Compact Fixed Ratchet Torque Wrench (40–200 in-lb) – QD2R200A. Also browse the full Snap-on torque tools shop for handles, testers and adapters.

Care, storage and calibration

• Store the wrench in its case after each shift. Then the scale, head, and handle stay clean and safe from drops.
• Wipe oil and dirt from the handle and head with a dry cloth. Also avoid soaking the wrench in solvent, because it can wash out the lubricant.
• Recalibrate every 12 months or 5,000 cycles, as ISO 6789-1:2017 recommends. We can arrange recalibration through an accredited laboratory when it falls due.
• Never use a click wrench to break loose a seized bolt. Also stop pulling right after the click, since overload can shift the release point.
• Pack wrenches in their cases for transport between sites. In addition, keep them dry in the humid season so the tube and head do not rust.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.