Compression Gauge Testing Kit – TTC2620

The force testing kit TTC2620 belongs to the Snap-on TTC force testing kits range, and Lost in HCM supplies it to workshops and factories across Vietnam. Snap-on lists the country of origin as USA.

Force testing kit TTC2620 overview

The force testing kit TTC2620 belongs to a small family of Snap-on kits for TTC tester and calibrator systems. These kits extend a TTC system beyond torque work. For example, they help a quality lab check force gauges, tension gauges, and tensiometers in one place.

The family has five kits, and Snap-on lists the USA as the country of origin for each one. They include tension, compression, and tensiometer testing kits. In addition, the line offers a force arm kit and a full calibration kit.

Specifications at a glance

The table below follows the Snap-on data for TTC2620. In addition, we converted imperial torque values to N·m where Snap-on lists none.

How the force testing kit works

The calibration kit works on a simple rule: torque equals force times distance. You hang known weights from an arm or wheel of known length or radius. As a result, the bench sees a known torque that you can compare with its display.

Larger wheels and the long arm give higher torque from the same weights. Meanwhile, small trays and light weights cover the low end of the scale. That is why the kit includes trays from 4 oz up to 50 lb.

Key features of the force testing kit TTC2620

The details below explain what each kit adds to your bench. They also show what to check before you add a new kit to your lab equipment list and budget.

• Built for TTC systems. Every kit in this family is an accessory for Snap-on TTC tester and calibrator systems. Therefore, a lab that already owns a TTC bench can add tests without buying a new platform.
• Tension gauge testing kit. The tension gauge kit lets the TTC bench check gauges that measure pulling force. So a lab can test push-pull and spring gauges on the same bench it uses for torque.
• Compression gauge testing kit. The compression kit sets up the bench to check gauges that measure pushing force. In addition, it keeps the load in line with the gauge, which supports a repeatable test.
• Tensiometer testing kit. The tensiometer kit lets a lab check tools that measure cable or belt tension. As a result, teams can verify these tools in house before they release them to the floor.
• Force arm kit. The force arm kit is a separate accessory for force work on a TTC system. Check the product page and the system manual, because fit depends on your bench model.
• Full calibration kit. The calibration kit includes a TTC3200 weight set, three calibration wheels, a 40 inch arm, and five weight trays. It also includes a TTC25002 calibration stand kit and a 1/2 by 3/8 inch adapter.

Typical applications

These kits solve one problem well: turning a TTC bench into a wider test station. Below are typical jobs where that matters, from gauge checks to training. Each one also rewards a clear, logged result.

• Force gauge verification. Labs check tension and compression gauges at set intervals to keep them trusted. With the right kit, the TTC bench applies a steady load, so the lab can compare readings step by step.
• Tensiometer checks before release. Teams that set cable or belt tension need a tensiometer they can trust. Therefore, the lab tests each tensiometer on the bench before it goes back to the floor.
• Tester verification with weights. A tester also needs regular checks against known values. For example, the calibration kit hangs known weights from an arm or wheel to apply a known torque.
• In-house quality routines. Many plants run weekly or monthly checks between formal recalibrations. In addition, a kit on the TTC bench makes those checks quick, so drift shows up early.
• Incoming tool inspection. New gauges and testers should pass a check before they enter service. So the quality team uses the bench to confirm each new tool and log its first reading.
• Training for lab technicians. New technicians learn force and torque basics faster with real weights and arms. Meanwhile, the kits show clearly how force, distance, and torque relate on a real bench.

Industries that use the force testing kit TTC2620

Force testing kits matter wherever a lab must trust its gauges and testers. The industries below rely on regular, recorded checks of these tools. Many of these teams also work in FDI plants and quality labs across Vietnam.

• Aviation maintenance. Aircraft teams use tensiometers and force gauges on control cables and other systems. Therefore, MRO shops at Vietnamese airports can test these tools on a TTC bench and keep records for audits.
• Automotive manufacturing. Vehicle plants use force gauges to check pedal, latch, and cable loads on the line. So FDI auto plants in Vinh Phuc and Hai Phong can verify those gauges in house.
• Electronics manufacturing. Electronics lines use push-pull gauges to test connector and button forces. In addition, plants in Bac Ninh and Thai Nguyen need traceable checks on these gauges for customer audits.
• Quality and metrology labs. In-house quality labs in FDI plants manage many torque and force tools at once. For this reason, one TTC bench with the right kits keeps tests and records in one place.
• Heavy equipment and lifting. Crane, hoist, and lifting teams measure cable and belt tension during setup and service. Meanwhile, contractors in Vietnam can test their tensiometers before each major job.
• Tool cribs in large plants. Large plants run tool cribs that issue and track hundreds of measuring tools. Thus, a TTC bench with force kits lets the crib check tools as they come back.

Force testing kit TTC2620 compared with similar brands

Before you buy, it helps to see how the force testing kit TTC2620 compares with other force test gear. The key question is not the kit alone. Instead, it is whether the kit fits the bench and tester your lab already owns.

If your lab already runs a Snap-on TTC system, these kits are the simplest way to add tests. They fit the bench you own and share its records. Even so, confirm current specs with each maker before you compare fixtures. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Start with the TTC system model on your bench. These kits are accessories, so check that each one fits your system before you place an order.
• List the gauges your lab must test before you order. For example, tension gauges, compression gauges, and tensiometers each need their own kit.
• Choose the calibration kit when you want to check the TTC system with known weights. Snap-on states that it works on all TTC systems.
• Plan bench space for the calibration arm and stand. The kit includes a 40 inch arm, so leave room for safe weight loading.
• Check the warranty line on each kit page. Some kits list a one-year Snap-on Repair Center term, while others list field repair parts terms.
• Ask for the manual with each kit you buy. That way, your technicians can follow the right setup steps from the first test.

For other sizes in the same range, compare Tension Gauge Testing Kit – TTC2610, Force Arm Kit – TTC26302, Calibration Kit – TTCCALKIT, Tensiometer Testing Kit – TTC2600. Also browse the full Snap-on torque tools shop for handles, testers and adapters.

Care, storage and calibration

• Store weights, wheels, and arms in their cases or on a clean rack. Then dents and scratches stay off the parts that set known values.
• Handle calibration weights with clean gloves and keep them dry. Also wipe dust off the trays, because dirt adds mass and shifts results.
• Recalibrate the TTC system on a fixed interval, such as every 12 months or as your quality plan requires. We can arrange recalibration through an accredited laboratory.
• Never load the bench beyond the rated capacity of the system or kit. Overload can damage the transducer, so check it after any shock load.
• Pack kits in padded cases for transport between sites. In addition, keep them dry during the humid season so steel parts do not rust.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.