Rohde & Schwarz RT-ZMA10-6 Modular Probe Tip or Accessory

Lost in HCM arranges Rohde & Schwarz RT-ZMA10-6 rental in Vietnam, with purchase and service options on request. The details below cover specifications, uses and how to plan a quote.

Rohde & Schwarz RT-ZMA10-6 is a six-piece solder-in probe tip cable set. Confirm the complete kit contents and compatible measurement system before ordering.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam: rT-ZMA10-6 specifications at a glance

Accessory model	RT-ZMA10-6
Manufacturer	Rohde & Schwarz
Manufacturer order number	1801.4349.02
Accessory category	RT-ZM modular probe system
Compatible probes	Rohde & Schwarz RT-ZM modular probe amplifier modules
Description	Set of six solder-in probe tip cables for the RT-ZM modular probe system
Performance	>16 GHz, <28 ps, P/N/DM/CM modes

These identifiers and compatibility details come from the official Rohde & Schwarz probe-accessories page. Contents and compatibility should be checked against the current manual and quotation.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam: confirm probe compatibility before ordering

The listed compatibility is Rohde & Schwarz RT-ZM modular probe amplifier modules. Confirm the probe model, revision, tip style, connector and intended contacting method.

Accessory kits, replacement parts, probes and oscilloscopes may use separate order numbers. Do not infer electrical ratings from the accessory alone.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam: typical probe-accessory schematic

Circuit test point
        │
        ▼
RT-ZMA10-6 contact accessory ── compatible R&S probe
        │
        ▼
R&S oscilloscope input ── measurement and documentation

This functional diagram shows the measurement relationship only. It is not an internal circuit or service schematic. Follow the probe manual for connection, spacing, grounding and safety limits.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam: accessory verification checklist

1. Record the exact probe and oscilloscope model.
2. Confirm RT-ZMA10-6 manufacturer order number and compatibility.
3. Inspect tips, clips, leads and insulation before use. Teams in Vietnam often choose Rohde & Schwarz RT-ZMA10-6 rental for this reason.
4. Use the shortest suitable ground and signal connection.
5. Preserve configuration and measurement evidence.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam: purchase and service inquiries in Vietnam

For a RT-ZMA10-6 inquiry, provide the probe model, tip or connector style, required contents, quantity and project dates. Exact supply is confirmed by quotation.

For service, include photographs of damaged or missing parts and the probe serial number. Damaged contacts or insulation should not be used.

Explore Lost in HCM equipment and service inquiries. Consult the official Rohde & Schwarz probe-accessories page for governing information.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam: rT-ZMA10-6 FAQ

What is the RT-ZMA10-6?

Rohde & Schwarz describes the RT-ZMA10-6 as a six-piece solder-in probe tip cable set.

Which probes are compatible with RT-ZMA10-6?

The official listing names Rohde & Schwarz RT-ZM modular probe amplifier modules. Confirm the exact probe revision and required contact method before ordering.

What is the order number for RT-ZMA10-6?

The manufacturer order number for RT-ZMA10-6 is 1801.4349.02.

Does RT-ZMA10-6 include an oscilloscope or probe?

The oscilloscope is ordered separately. Confirm the included probe, accessories and kit contents in the quotation.

Can Lost in HCM help source RT-ZMA10-6?

Send the probe model, oscilloscope model, required contact method, quantity and project dates. Supply and compatibility require quotation confirmation. This applies to every Rohde & Schwarz RT-ZMA10-6 rental we arrange in Vietnam.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What is the RT-ZMA10-6?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Rohde & Schwarz describes the RT-ZMA10-6 as a six-piece solder-in probe tip cable set.”}},{“@type”:”Question”,”name”:”Which probes are compatible with RT-ZMA10-6?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The official listing names Rohde & Schwarz RT-ZM modular probe amplifier modules. Confirm the exact probe revision and required contact method before ordering.”}},{“@type”:”Question”,”name”:”What is the order number for RT-ZMA10-6?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The manufacturer order number for RT-ZMA10-6 is 1801.4349.02.”}},{“@type”:”Question”,”name”:”Does RT-ZMA10-6 include an oscilloscope or probe?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The oscilloscope is ordered separately. Confirm the included probe, accessories and kit contents in the quotation.”}},{“@type”:”Question”,”name”:”Can Lost in HCM help source RT-ZMA10-6?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Send the probe model, oscilloscope model, required contact method, quantity and project dates. Supply and compatibility require quotation confirmation.”}}]}

How the oscilloscope works

Bandwidth sets the fastest signal the scope can show without distortion. Resolution sets how fine a step it can see. For example, 10-bit and 12-bit scopes reveal small ripple that an 8-bit scope may hide in its noise.

Mixed signal scopes add digital logic channels next to the analog inputs. So engineers can view a data bus and a power rail together. Some models also decode serial buses or add a spectrum view, which links timing and RF behavior.

What to look for in a oscilloscope

Oscilloscopes vary widely in bandwidth, resolution, and features. The right model depends on your signals and how you debug them. Therefore, the points below help you match a scope to your circuits, probes, and test plan.

• Bandwidth for your signals. Entry models start at 50 MHz, while mid-range models run past 1 GHz. So pick a bandwidth well above your fastest signal. That margin keeps edges and timing accurate on screen.
• High vertical resolution. Resolution sets how much detail you see on small signals. For example, the Rigol DHO4204 and Tektronix MSO44B offer 12 bits. Meanwhile, the R&S RTB2004 and RTM3004 offer 10 bits for clearer power rail views.
• Deep acquisition memory. Deep memory keeps the sample rate high on long captures. The DHO4204 offers 500 Mpts, while the RTM3004 offers 80 Mpts. Therefore, you can record long sequences without losing detail. So, plan it early when you book a Rohde & Schwarz RT-ZMA10-6 rental in Vietnam.
• Channels and logic inputs. Most models here offer two or four analog channels. Mixed signal models add logic inputs, such as 16 channels on the MSOX4154A. As a result, you can debug buses and analog signals together.
• Built-in tools and decode. Many scopes add serial decode, a function generator, or a spectrum view. For instance, the MDO34 includes a spectrum analyzer, while the DSOX1204G adds a generator. These tools also save bench space and cost.
• Probes that match the scope. Probes also shape what the scope really sees. So R&S active probes, such as the RT-ZD and RT-ZS models, extend reach for fast signals. Modular RT-ZM probes also accept a range of tips.

Industries that use the Rohde & Schwarz RT-ZMA10-6 rental Vietnam

Every product with a circuit board needs signal checks at some stage. That is why scopes appear in labs, factories, and service centers. Here is how each sector in Vietnam uses them in design, production, and repair work.

• Electronics manufacturing services. EMS plants in Bac Ninh, Bac Giang, and Binh Duong debug boards for many brands. So they keep scopes on test and repair benches. They also rent extra units during production ramps.
• Power electronics. Makers of supplies, chargers, and inverters need clean views of fast switching. Therefore, they use high-resolution scopes with suitable probes. This helps them pass efficiency and noise tests. Our Rohde & Schwarz RT-ZMA10-6 rental units in Vietnam ship ready for this kind of work.
• Automotive and EV. Vehicle electronics and EV systems need validation in labs and vehicles. For example, teams check CAN buses, gate drives, and sensors. Portable and 12-bit scopes both play a role.
• Semiconductor and high-speed design. Chip and high-speed board teams measure fast edges and signal integrity. So they pair higher-bandwidth scopes with active probes. Modular probe systems also cover many tip styles.
• Industrial automation. Factories run PLCs, drives, and sensors that sometimes fail without warning. As a result, maintenance engineers use scopes to trace faults. Portable models help them work at the machine.
• Education and training. Universities and training centers in Vietnam teach circuits with hands-on labs. Therefore, they need many reliable entry scopes at once. Rental helps them equip a lab for a single course.

Rohde & Schwarz RT-ZMA10-6 rental Vietnam compared with other brands

Before you choose, compare the Rohde & Schwarz RT-ZMA10-6 rental Vietnam with other well-known lines. However, the best fit depends on your signals, probes, and team habits. So start with bandwidth and resolution needs, and then compare features and support.

If your team already uses these four brands, the models here need very little new training. Other makers offer strong options for this work too. Even so, confirm current specs with each maker before you compare. Specifications change, so confirm current data with each maker before you decide. Rental of the Rohde & Schwarz RT-ZMA10-6 is available across Vietnam.

Rent or buy?

Buy a scope when an engineer uses it every day on the same type of work. Ownership also suits benches that run fixed tests every shift. However, many teams own entry scopes and rent higher-end models and probes for big projects.

Selection tips

• Choose a bandwidth several times higher than your fastest signal frequency. So edges and timing stay accurate on screen and in measurements.
• Pick a 10-bit or 12-bit scope for power rails and small signals. Otherwise, an 8-bit scope may hide ripple and noise in its own noise floor.
• Count the analog and digital channels you need at once. For example, bus debug often needs logic channels next to two analog inputs.
• Check memory depth when you need long captures. Deep memory keeps the sample rate high, so you can zoom in on detail after the capture ends.
• Plan probes with the scope, because the probe limits what you see. Also choose high-voltage or differential probes for power work.
• List the buses you must decode, such as I2C, SPI, CAN, or UART. Then confirm the scope has the matching decode options installed.

Handling and care

• Wear an ESD strap and handle active probe tips with care. Also store tips and modules in their cases, because they break easily. Teams in Vietnam often choose Rohde & Schwarz RT-ZMA10-6 rental for this reason.
• Respect the input limits of every channel and probe. Then use proper high-voltage or differential probes on mains and power circuits.
• Let the scope warm up for the time the maker states before precise measurements. Next, run probe compensation or calibration routines as the manual says.
• Follow the calibration interval each maker states, which is often one year. Rental units ship with a valid calibration certificate. Also, we can arrange service through the maker or an authorized partner.
• Ship scopes and probes in padded cases with probes coiled loosely. In addition, keep them dry during Vietnam's humid wet season.

Frequently asked questions

Request a quote

Tell us the model, options, dates and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669. This applies to every Rohde & Schwarz RT-ZMA10-6 rental we arrange in Vietnam.