Adjustable Limiting Driver – QTS135

The torque limiting driver QTS135 belongs to the Snap-on torque limiting drivers range, and Lost in HCM supplies it to workshops and factories across Vietnam. Snap-on lists the country of origin as USA. The length is 7 inches.

Torque limiting driver QTS135 overview

The torque limiting driver QTS135 is a hand driver with a built-in clutch that stops at a set torque. When you reach the value, the clutch slips and the handle turns freely. So even a heavy-handed user cannot overtighten the fastener.

Snap-on builds this family in the USA with a range of 5 to 35 in-lb. Settings move in 0.5 in-lb steps, and each driver uses a 1/4 inch square drive. Meanwhile, the family offers one preset model and one adjustable model.

The range is 35 in-lb maximum. The increments is 0.5 in-lb. The range is 5 in-lb minimum.

The square drive is 1/4 inches.

Specifications at a glance

The table below follows the Snap-on data for QTS135. In addition, we converted imperial torque values to N·m where Snap-on lists none.

How the torque limiting driver works

Inside the handle, a spring presses two clutch parts together. While torque stays below the setting, the clutch holds and turns the bit. Then, once torque reaches the set value, the clutch parts slide over each other and the handle spins freely.

This design limits torque instead of only signaling it. Because of this, the user cannot push past the setting by pulling harder. That is why torque limiting drivers suit assembly work where the same value repeats all day.

Key features of the torque limiting driver QTS135

The details below explain why these drivers protect small threads and delicate parts. They also show what to check before you add a new driver to your line or bench.

• Clutch stops at set torque. The clutch allows free rotation when the driver reaches its set torque. Therefore, it helps prevent overtightening, even when an operator keeps turning the handle.
• Range of 5 to 35 in-lb. Both models cover 5 to 35 in-lb in 0.5 in-lb steps. So they suit small screws on electronics, panels, and light assemblies where high torque would cause damage.
• Preset model for fixed values. The preset model ships set at the factory to the torque you name when ordering. As a result, operators on the line cannot change the value by mistake.
• Adjustable model with micrometer scale. The adjustable model uses a micrometer-type scale for quick setting changes. In addition, this suits repair benches and labs where values change from job to job.
• Rated accuracy of four percent. Snap-on rates the adjustable model within ±4% of setting from 20% of capacity to full capacity. That rating applies in both clockwise and counterclockwise directions.
• Free rotation after release. On the adjustable model, the clutch allows 25° of free rotation once it reaches the set torque. This clear release tells the operator to stop and move on.

Snap-on data sheet notes

In addition, the Snap-on data sheet for QTS135 notes:

• Micrometer-type adjustment.
• Clutch allows 25° of free rotation upon reaching the set torque.
• Guaranteed accuracy: within ±4% of setting from 20% of capacity to full capacity clockwise and counterclockwise.

Typical applications

These drivers solve one clear problem: repeatable torque on small screws without judgment by feel. Below are typical jobs where that matters, from circuit boards to panels. Each one also rewards a known value.

• Electronics assembly lines. Circuit boards, housings, and connectors use small screws that strip easily. Therefore, a preset driver gives every operator the same torque without any judgment on feel.
• Electrical terminals and panels. Terminal screws need enough torque to hold a wire but not crush it. So technicians use a torque limiting driver to tighten each terminal to the maker's value.
• Medical and precision devices. Precision devices use small fasteners in plastic and light metal parts. In addition, the clutch release protects these costly parts from cracks and stripped threads.
• Aircraft panels and avionics. Aircraft panels and avionics trays use many small screws with set values. For example, MRO teams use limiting drivers to fit them quickly and evenly.
• Repair benches and labs. Repair benches often switch between products with different screw values. The adjustable model suits these jobs well, because its micrometer scale resets in just seconds.
• Final assembly quality checks. Final assembly stations need a simple way to confirm screw torque. With a preset driver, the clutch release itself shows that the screw reached its value.

Industries that use the torque limiting driver QTS135

Any sector with small fasteners in soft or delicate parts gains from a driver that stops at the set value. So these drivers show up on lines, benches, and hangars. Here is how each industry uses them.

• Electronics manufacturing. Electronics plants in Bac Ninh, Bac Giang, and Hai Phong drive millions of small screws each month. So preset torque limiting drivers help FDI lines keep every screw within spec.
• Electrical and switchgear. Panel builders and switchgear plants tighten terminal screws on every circuit. Therefore, contractors in Vietnam's industrial parks use limiting drivers to avoid loose or crushed wires.
• Automotive electronics. Sensor, lighting, and control module makers use small fasteners in plastic housings. In addition, Vietnam's growing automotive supply chain needs tools that protect these parts.
• Aviation maintenance. Avionics and cabin work involves many small screws with exact values. MRO teams at Vietnamese airports also need tools that stop at the set torque every time.
• Medical device assembly. Medical device plants assemble small parts that must not crack or loosen. For this reason, suppliers in southern industrial parks use limiting drivers on their lines.
• Appliance assembly. Appliance plants in Binh Duong and Dong Nai fit covers, panels, and controls with small screws. Meanwhile, preset drivers help new operators reach the right torque from day one.

Torque limiting driver QTS135 compared with similar brands

Several makers sell preset and adjustable torque screwdrivers. Each line uses its own clutch design, scale, and bit fit. So the right choice depends on your screws and your line. The comparison below shows where the torque limiting driver QTS135 sits among common choices.

If your team needs a simple driver that stops at a set value, these Snap-on drivers are a strong fit. They cover 5 to 35 in-lb with preset or adjustable control. Even so, confirm current specs with each maker before you compare ranges. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Choose the preset model when one value repeats all day. Then operators cannot change the setting, and every screw gets the same torque.
• Choose the adjustable model when values change from job to job. Its micrometer-type scale lets a technician reset the value in seconds.
• Pick a spec that sits well inside the 5 to 35 in-lb range. For example, a 2 in-lb spec needs a smaller tool, so check the low end first.
• Name the exact torque value when you order a preset driver. Snap-on sets it at the factory, so give us the value and unit with your request.
• Check the 1/4 inch square drive against your bits and adapters. Also plan the bit holder you need for the screws on your line.
• Plan a torque tester for regular checks. A tester lets you reset or readjust both drivers, so they stay on value.

For other sizes in the same range, compare US Preset Limiting Driver – QTSP135. Also browse the full Snap-on torque tools shop for handles, testers and adapters.

Care, storage and calibration

• Store each driver in a rack or drawer, away from heavy tools. Then the handle and drive stay free of knocks that could affect the clutch.
• Wipe the driver with a dry cloth after use, and never dip it in solvent. Also keep dust out of the scale, because grit can affect the setting.
• Send the driver for calibration every 12 months or 5,000 cycles, as ISO 6789-1:2017 recommends. We can arrange recalibration through an accredited laboratory.
• Never use the driver to loosen seized screws or as a pry tool. Overload can wear the clutch, so check the value on a tester after any misuse.
• Pack drivers in a padded case for transport between sites. In addition, keep them dry during the humid season so the clutch and drive stay clean.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.