Extension Arm (For 2000 and 2800 Series Loaders) – TTC5500-1

The torque tester accessory TTC5500-1 is a Snap-on torque tester accessory that Lost in HCM supplies to workshops and factories across Vietnam. Snap-on lists the country of origin as USA. The application is Use to calibrate torque wrenches up to 80" long.

Torque tester accessory TTC5500-1 overview

Plants that check their own torque tools need spare parts they can trust. The torque tester accessory TTC5500-1 comes from Snap-on, so it matches the design of the tester it serves. In short, you keep one system instead of mixing parts from different makers.

Warranty terms differ across this family, so check each product page. The smart cable carries a lifetime warranty, while the screwdriver kit lists one year at a Snap-on Repair Center. Then the arm and stand kit are field repairable with repair parts.

Specifications at a glance

These figures come from the Snap-on listing for TTC5500-1. Values marked “calculated” are unit conversions we added for convenience.

How the torque tester accessory works

Long torque wrenches need support along their full length during a test. Therefore, an extension arm lets the loader reach the handle of wrenches up to 80 inches long. That way, the pull stays at the right point on the grip.

Torque screwdrivers turn on a vertical axis, unlike a wrench pulled on a bench. So a screwdriver testing kit holds the driver square to the transducer. Then the operator turns the driver and compares the display value with the set torque.

Key features of the torque tester accessory TTC5500-1

The details below explain what each accessory adds to your tester. They also show what to check before you order a part for an existing 2000 or 2800 Series bench.

• Made for Snap-on test systems. Each part in this family is a Snap-on accessory for electronic torque tester and calibrator systems. Therefore, it matches the design of the bench it serves instead of a generic fit.
• Replacement smart cable. The smart cable replacement lets you swap a worn or damaged cable on the tester. As a result, the bench returns to service without a full system replacement.
• Torque screwdriver testing kit. The testing kit adds torque screwdriver checks to the 2800 and 2000 Series systems. So one bench can cover hand torque drivers as well as torque wrenches.
• Extension arm for long wrenches. The extension arm works with 2000 and 2800 Series loaders. It lets the loader handle torque wrenches up to 80 inches long, which covers many heavy-duty models.
• Complete calibration stand kit. The stand kit gives the tester a solid base and includes adapters for setup. In addition, a fixed stand helps every operator run the same test in the same way.
• Made in the USA. Snap-on lists the USA as the country of origin for every item in this family. Plus, each part ships with CO/CQ papers from us for audit records.

Typical applications

These parts solve practical problems on a test bench, from worn cables to long wrenches. Below are typical jobs where they matter most. Each one also helps your team trust its torque tools.

• Daily torque wrench checks. Quality teams check torque wrenches on a bench before a shift or a critical job. A stable stand and a sound cable keep those checks quick and repeatable.
• Torque screwdriver verification. Electronics and assembly lines use many small torque drivers. Therefore, the screwdriver testing kit lets the same bench verify them before they reach the line.
• Testing long torque wrenches. Heavy-duty wrenches for trucks, cranes, and steel work can reach 80 inches. With the extension arm, the loader supports them during a test instead of a hand-held setup.
• Incoming tool inspection. New torque tools should pass a check before they enter the tool crib. So a complete test bench helps receiving teams spot a faulty tool on day one.
• Setting up a new test bench. A new quality room needs a solid base for the tester and transducers. The calibration stand kit gives that base, and its adapters help match common setups.
• Keeping a bench in service. A worn cable can stop a whole test bench. For that reason, a spare smart cable on the shelf keeps checks running when the old one fails.

Industries that use the torque tester accessory TTC5500-1

Any sector with many torque tools needs a reliable way to check them between formal calibrations. So test benches and their parts show up in plants and hangars. Here is how each industry uses them in practice.

• Automotive assembly. Car and motorbike plants run hundreds of torque tools on each line. In Vietnam, many FDI plants check those tools in-house, so a complete bench saves time and audit stress.
• Electronics manufacturing. Electronics plants in Bac Ninh and Hai Phong rely on small torque screwdrivers. Therefore, the screwdriver testing kit helps quality teams verify drivers before each production run.
• Aviation maintenance. Aircraft maintenance teams must prove that every torque tool reads correctly. So MRO shops at Vietnamese airports use bench testers to check wrenches between formal calibration dates.
• Heavy equipment maintenance. Service teams for cranes, trucks, and mining gear use long torque wrenches. For this reason, the extension arm lets them test those tools on the same bench as smaller ones.
• Factory tool cribs. Plants in Binh Duong, Dong Nai, and Long An keep large tool cribs for maintenance. A working tester bench helps crib staff catch out-of-tolerance tools before they reach the floor.
• Energy and power plants. Power plants use torque tools on turbines, flanges, and switchgear. Therefore, in-house checks with a complete tester help crews in Vietnam trust their tools during outages.

Torque tester accessory TTC5500-1 compared with similar brands

Several makers sell torque testers, loaders, and bench accessories. Each system uses its own fittings and cables, so parts rarely swap across brands. The comparison below shows where the torque tester accessory TTC5500-1 fits among the common choices.

Choose accessories that match the tester you own first, then compare range and warranty. Snap-on parts suit Snap-on 2000 and 2800 Series benches. Meanwhile, a new bench from another maker needs its own parts, so confirm current specs with each maker. Specifications change over time, so confirm current data with each maker before you decide.

Choosing the right model

• Start with the model of your tester and loader. Then confirm that the part lists your system, such as the 2000 or 2800 Series.
• Measure your longest torque wrench before ordering the extension arm. The arm suits wrenches up to 80 inches long, so check that your tools fit.
• Count the torque screwdrivers your plant uses each month. If the number is high, the screwdriver testing kit can bring those checks in-house.
• Keep one spare cable for each busy test bench. That way, a damaged cable does not stop your daily tool checks for days.
• Plan the bench layout before you order a stand kit. In addition, leave room for the loader, the display, and safe handling of long wrenches.
• Read the warranty line on each product page. Terms range from lifetime to one year, while some parts are field repairable with repair parts.

For other sizes in the same range, compare Complete Calibration Stand Kit (Including Adaptors) – TTC25002, Torque Screwdriver Testing Kit (for 2800 and 2000 Series Systems) – TTC75002, Smart Cable Replacement – TTC900121. Also browse the full Snap-on torque tools shop for handles, testers and adapters.

Care, storage and calibration

• Store spare cables coiled loosely in a dry box, away from sharp tools. Then the wires and plugs stay free of kinks and dents.
• Wipe the stand, arm, and kit parts with a dry cloth after use. Also keep oil and dust off plugs, because dirt can affect the signal.
• Keep torque wrenches on the ISO 6789-1:2017 cycle of 12 months or 5,000 uses. Also, we can arrange recalibration of your tester through an accredited laboratory.
• Never load a wrench or driver above the range of the transducer in use. Too much load can damage the sensor, so check the range before each test.
• Pack accessories in padded cases when you move the bench between sites. In addition, keep them dry during the humid season so metal parts do not rust.

Frequently asked questions

Request a quote

Send us the part number, quantity and delivery site, and we will reply with a quote. You can request a quote online or call 0902 327 669.